My drivers window does not move at all, the passnger one will go up and down with the passenger door switch, but the passenger switch on the drivers door can stop the passenger window from going up and down. like the two switches are pressed in opposite direction. any hepful hints??????
If you have the wiring diagram then you just, remove the connector for the back of the switch and then use a wire to jump the current from the one side to to the other, if that make you nervous then just use a test light ( probably a better idea ) , find you 12V hot side and then hook on the wire that goes to the motor , your test light should be off till you press the switch then it should light up, if it does then the switch is good, if not then replace it. hope that helps