• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Power Wire Upgrade w/ Alternator Install

  • Thread starter Thread starter foxbodyrules
  • Start date Start date Jul 5, 2005
F

foxbodyrules

New Member
Sep 17, 2004
67
0
0
Jul 5, 2005
#1
  • Jul 5, 2005
  • #1
Hey all,
I installed an aftermarket alternator tonight and I had some questions. The alternator is made by OE Plus ( www.oeplus.com ) and it's a 100 amp alt. I bought the PA Performance Power Wire Upgrade Kit as well. We tried to find a place for the Power Wire Kit to hook to the alternator but it was just a clip sort of.. there wasn't a place to hook into the alternator. Now i'm almost positive that you have to upgrade the power wire when you upgrade the alt. amperage. I was just confused as to why the PA Performance kit wouldn't work.. the only reason I could think of was that the alternator wasn't made by PA Performance. The Alternator I bought came with a paper that said "Every time a Ford IAR alternator is replaced, a new alternator-to-wiring harness plug must be used." Is that like the same thing as the Power Wire Kit? I'm just confused as to where to connect the Power wire on the alternator... If the alternator will be ok without the power wire upgrade kit.. then i have less worrying to do. I just wanna make sure everything is safe- if anyone can tell me where to hook the power wire to the alternator.. or if it's not even needed, that would be great, thanks!
 
I

Insane3D

New Member
Jul 21, 2004
310
0
0
Jul 5, 2005
#2
  • Jul 5, 2005
  • #2
It sounds like the alternator you got is not a 3G unit, but just a OEM replacement for the 87-93 Mustangs. Are you sure it's a "100A" unit?

Can you take a picture or describe the connections?
 
F

foxbodyrules

New Member
Sep 17, 2004
67
0
0
Jul 5, 2005
#3
  • Jul 5, 2005
  • #3
I'm sure that's probably it.. probably not a 3G unit. Sorry! So the PA Performance kit won't work.. and I have to get some other upgrade? Or is it going to be fine without the upgrade?
 
I

Insane3D

New Member
Jul 21, 2004
310
0
0
Jul 5, 2005
#4
  • Jul 5, 2005
  • #4
You have a couple of options. Assuming it really is a 100A unit, you probably will be fine with the stock wiring. Does it have the same connections that the factory alternator did?

You "could" modify the PA harness and splice on the stock connector, but I wouldn't advise it. Also, that PA harness has a 200A fuse in it which is probably way to high a rating for a stock replacement.

Since you already bought the PA wiring harness, I would suggest you return that alternator, and go to the local parts store and get a alternator for a '94- '95 GT/Cobra. A new one will run ~$180, and rebuilts will be less. With a true 3G, you could use the PA harness no problem.

Can you return that one?
 
F

foxbodyrules

New Member
Sep 17, 2004
67
0
0
Jul 5, 2005
#5
  • Jul 5, 2005
  • #5
Well.. no I was an idiot and installed it already.. soo looks like i'm gonna go with option one.. as long as it is safe. All the connections were the same.. the only difference is the new one was like 180 degrees opposite of the stock one.. actually it wasn't stock it was a ford motorcraft remanufactured one which i didn't realize. I bought it at salvo auto parts, the guy told me it was 100 amps so I'm pretty sure it's 100A. Thanks for your help.. i just wanna be safe.
 
I

Insane3D

New Member
Jul 21, 2004
310
0
0
Jul 6, 2005
#6
  • Jul 6, 2005
  • #6
No problem...

Just an FYI though...if it's a remanufactured Ford one, then it's probably still only a 75A unit...even though the guy said it was 100A.
 
You must log in or register to reply here.

Similar threads

F
3G Alternator install question
  • fathead429
  • Oct 24, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
7
Views
260
1974 - 1978 Mustang II Talk & Tech Oct 25, 2026
LILCBRA
W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
507
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
Electrical Alternator not charging after terminator 2 install.
  • Sfab79
  • Aug 24, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
2K
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
J
Power Wire Upgrade Question
  • jhaling
  • Dec 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
358
SN95 4.6L Mustang Tech Mar 23, 2026
Noobz347
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?