ppl with vt stage 2 cams-INPUT NEEDED

[blckstng96]

im just wondering what your call pulls to rpm wise with these cams.list what you have for heads and stuff.my car doesnt seem to be pulling up to where it should be with my setup
5.0 stroker
fox lake stage 2 heads with manley hi rev springs and titanium retainers
vt stage 2 n/a cams
bbk upper with 75mm throttle body
jlt
lightning maf
24lb injectors
that should be adequate enough to give an idea.

thanks in advance

 

[Scorcher2005]

Have you put it on a dyno to see where your peak HP rpm is? You have any type of tune on that or running stock settings? You put the cams in right? Many factors to consider here...

 

[blckstng96]

it is tuned and you can see on the graph from the datalogging that the power is pretty much done at 6k,you dont need a dyno to tell you. i do also have a a stock lower intake and im thinkin the cams are not enough for the motor since it has been bored and stroked.