Prices on Long Tubes/ mid pipe.

[Adam95GT]

bbk long tube headers and a mid pipe for a 94 or 95 mustang gt...the headers have flowmaster scavenger colectors on them 3" and were recoated ceramic and a 3" mid pipe...will come down on price a little

Found that add really local... not sure if they will fit because of my old school trickflow highports. (ports raised 3/4'' but the bolt pattern is normal making the normal highport fox headers, and the trickflow headers not work.(newer highports have the bolt pattern off set) guy wants $400 not sure if its a deal or not.... what should i offer... You think ill be able to make them fit???? And if so should i pick them up.... the tubular k will be going on... And i could sell my almost new catted bbk H and matching bbk shorties

 

[MotiV8ed_95GT]

I also saw those on c/l I would just buy new rather than mess with those. You also have to deal with running gaskets to connect your h-pipe with that set.

Ross

 

[final5-0]

Not only would my thought be if they might fit

I'd have a real concern about how they would match up to the ports

My Mac's covered a tiny bit of the ports on my 165's

I introduced them to Mr. Die Grinder and a Porting Burr

Grady

 

[Adam95GT]

Not only would my thought be if they might fit

I'd have a real concern about how they would match up to the ports

My Mac's covered a tiny bit of the ports on my 165's

I introduced them to Mr. Die Grinder and a Porting Burr

Grady

True... but that 3/4 inch could cause issues with my floor pan....

 

[StinkinLincoln]

i have accufabs and canfield 195's (they are raised .200 i believe) i have plenty of floor pan room.

 

[Adam95GT]

i have accufabs and canfield 195's (they are raised .200 i believe) i have plenty of floor pan room.

mine are .75'' raised... you have more then 1/2'' clearance???

 

[StinkinLincoln]

o yea, just guessing i would say 2 inches.

 

[Tom95gt]

What did you decide on these?

 

[The O.G.]

these r on ebay as well, $320 as we speak