Pro 5.0 install tools?

[Matts89Notch]

What tools are needed to R&R the factory unit with a pro 5.0 sts...I did a search and could find nothing...

 

[HISSIN50]

You need to remove four 8 or 10 mm bolts and four 13 mm bolts IIRC.

Getting the front two dust boot bolts (the smaller ones) off with the console installed can be a pain. A ratcheting box end wrench worked well for me.

It's been years since I did this, so my bolt-size info might be off.

Good luck.

 

[MustangOwner]

Well im installing my hurst shifter right now, its all easy but removing the insulator or whatever it is. it has 4 8mm bolts. You gotta get a ignition wrench or just bend a 8mm wrench so it works. I bent mine. And you need sealer for the new shifter. Thats it

 

[vikingpower]

so easy a caveman can do it

 

[tording]

so easy a caveman can do it

What if I said "so easy a therapist can do it".