Pro 5.0 shifter install questions..

That is why you adjust the stops so you putit where you like it...put it in first where you like it, then tighten the stop so it will stay right there then do the same in second.....if you still hit your knuckles try again I guess as for the knob maybe some teflon (plummbers tape) would help?

the stops are there to provide you a means from bending/breaking the shift forks - not for any comfort issues. you put it in gear and move the adjuster AWAY from the shifter (so there is a small small gap between the shifter and the stop). this way you will fully engage the gear. if you are touching the stops, you take a chance on not engaging the gear(s) all the way.
the point is that when it is all the way in gear, if you push on the shifter a little more, the stops come in and keep you from over extending the shifter. be sure to put in 1,3,5 and 2,4,R and make sure none of the gears have the stop touching the shifter handle - there should be a very small clearance.

for your hand hitting the dash, that does not sound right. why are you using the stock handle with an aftermarket shifter? the ergonomics are most likely different, no?
or do you mean the OEM shift knob? if so, using tape etc to shim it can work, but you dont want your knob to come off. good luck.

85GTlover said:

That is why you adjust the stops so you putit where you like it...put it in first where you like it, then tighten the stop so it will stay right there then do the same in second.....if you still hit your knuckles try again I guess as for the knob maybe some teflon (plummbers tape) would help?

Click to expand...

Whoh buddy! The stops aren't to adjust the handle where you like it....they're to protect the tranny shift forks. Put it in gear fully, then adjust the shift stop so it is touching the handle....then back it off a half turn. (be sure to lock tight it)

The reason for them is that if you didn't have them, under hard shifts you can actually force the handle too far and bend the forks in the transmission.

GCD, i was gonna ask that, but actually erased it, cuz i did not want to come off as too much of a jerk (just the normal amount).
good deal, glad you got it figured out. enjoy