PRO M 42lb supercharged

  • Sponsors (?)


Ok the transfer tables aren’t readily available for my Pro M 77mm calibrated for 42lb injectors.

I'm installing a 408w with a Vortech SC. I have new 72 lb injectors. Since I don't have the MAF transfer table I'm think of increase my low and high injector slope by a proportional amount on my tweecer tuner. In this case I would multiply each by 1.714. I think as long as I don't peg the MAF, I'll be alright. I'll data log and run through the gears at my shift points and then look at the MAF voltage


Will this work?