proform electric fan

NFGTragedy

New Member
Oct 19, 2004
155
0
0
Rochester, NY
Just curious how to get it wired in so it doesn't run when the car is off... I have it right now wired direct into the fuse panel using a spade connector but it continues to run with the car off and drains the battery... Is there any way to wire the hot so it only runs when key is on?
 
Sourcing power from the interior is NOT how I'd do it. But if you must, simpy choose a fused power source that is only key-on hot. It sounds like your existing power source is always hot.

Instead, I'd run a relay under the hood - it's safer, doesnt need a big power donor from the interior and allows the fan to perform better.

Good luck.
 
HISSIN50 said:
Sourcing power from the interior is NOT how I'd do it. But if you must, simpy choose a fused power source that is only key-on hot. It sounds like your existing power source is always hot.

Instead, I'd run a relay under the hood - it's safer, doesnt need a big power donor from the interior and allows the fan to perform better.

Good luck.
:) This is the info you're looking for.