proper way to install new torqe converter

davins130

New Member

May 21, 2004

424

0

0

May 21, 2005

#1

• May 21, 2005

• #1

my street edge 3000 stall torque converter from edge racing should be here this week, and friday it all going back together finally. do i have to fill the torque converter up with fluid? could someone tell me what to do, and also when i put it on does it just slip on like the old one slipped off, becuase i heard that you can install it wrong and i dont see how. thanks!

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

May 21, 2005

#2

• May 21, 2005

• #2

The only thing I know you need to do, is rotate the converter so it seats in the pump, otherwise, you'll do tons of damage to the pump. I'm not exactly sure how many times it needs to seat, but i remember it popped a couple times with my friend's AODE in his '97. I did add enough fluid to it, so it wouldn't run empty, but wouldn't spill over when I turned it up on its side to put it into the transmission. You should feel a huge difference with the converter, especially with the 4.10 gears, too Good luck, let us know how it goes!

 

89MustangGX

I have nothing productive to add!

Jul 3, 2001

10,262

1

0

Mill Creek, WA

May 21, 2005

#3

• May 21, 2005

• #3

My experience is with an AOD, but I believe it's pretty much universal.

Put a quart of fluid in the converter. Then slide the onverter onto the input shaft. It will 'click' into place a coupel times, maybe three. You will know it's on all the way when it is fully inside the bellhousing. If you want -- take measurements on your old one first so you know.

I think that's all there is to it.

 

ponyboy19

Founding Member

May 24, 2000

1,640

0

36

May 21, 2005

#4

• May 21, 2005

• #4

Pretty much all you need to know
http://www.partshp.com/ConverterInstructions.htm

 

davins130

New Member

May 21, 2004

424

0

0

May 23, 2005

#5

• May 23, 2005

• #5

thanks that helps me out alot, also how much oil does the tranny take total? i want to know how much to buy so i dont have to run back to the autoparts store

 

juiced_94gt

Active Member

Mar 30, 2005

1,143

0

36

Southern California

May 23, 2005

#6

• May 23, 2005

• #6

like 12 quarts should do it

 

SN95StangMan

New Member

Jul 5, 2003

1,292

0

0

Lynwood, CA

May 23, 2005

#7

• May 23, 2005

• #7

I would suggest getting a tranny cooler if you dont already have one. You want to keep things running cool there. I have one of the B&M stacked plate coolers. They work good and are pretty cheap.

 

davins130

New Member

May 21, 2004

424

0

0

May 25, 2005

#8

• May 25, 2005

• #8

yea i have one, and a shift kit in there too, the only thing else i need is a chip for my shift points, but i dont need that immideatly

 

gcomfx.com

Founding Member

Oct 22, 2002

3,690

0

56

Republic, MO

May 25, 2005

#9

• May 25, 2005

• #9

Three clicks.... and put a half quart in the converter the night before. Andre said it can't hurt to let it soak over night.

Almost forgot... mine as a fresh rebuild. Crazy thing held 14 or more quarts. I'll have to go look it up, but it was definately over a case. You might look at putting a tranny additive in it while you are at it.

 

davins130

New Member

May 21, 2004

424

0

0

May 26, 2005

#10

• May 26, 2005

• #10

well the one i bought has 12 thousand miles on it since a rebuild..Did you get the hex bolts for your edge converter? the guy on the phone said the come with nuts too but he said not to use them, and when the converter came last night there were no nuts, and i was wondering if you used them or not? also what kind of additive, im going to run mercon V in it.

 

gcomfx.com

Founding Member

Oct 22, 2002

3,690

0

56

Republic, MO

May 26, 2005

#11

• May 26, 2005

• #11

Didn't use the nuts... just the hex bolts. On the additive... I would have to go look it up. It's in a red bottle at Oreillys. Costs like $10 or so.