• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

pulled codes need info

  • Thread starter Thread starter red93gthb
  • Start date Start date Dec 7, 2008

red93gthb

New Member
Nov 1, 2008
0
0
0
Suwanee, Georgia
Dec 7, 2008
#1
  • Dec 7, 2008
  • #1
when key was turned:
keoe 11
separator code

when engine was on:
keor 11
memory code 34
memory code 96

can you tell me what these are or show me how to find out
 

90topdown

Member
Feb 16, 2006
138
1
16
Philadelphia, PA
Dec 7, 2008
#2
  • Dec 7, 2008
  • #2
Code 34- PFE or EVP circuit above the closed limit of 0.67 volts.

Code 96- Fuel pump secondary circuit failure. The EEC did not sense battery voltage on the Fuel Pump Monitor circuit.

What sort of problems are you having??
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 8, 2008
#3
  • Dec 8, 2008
  • #3
Ok cont mem code 34. Ck evp resistance while applying vacuum to egr valve. Note the evp circuit indicated that the egr valve was open with the engine at stabilized operating temp and at idle..than cont mem code 96 fuel pump circuit was code 87 also present if no check eec iv harsness .code 96 without 87 indicates that during vech operation ,one of the following occurred,open in the vbatt circuit between batt+ and the fuel pump relay,fuel pump relay contacts opened,open in the power to pump circuit from the fpr to the fpm splice. Want more?
 

red93gthb

New Member
Nov 1, 2008
0
0
0
Suwanee, Georgia
Dec 8, 2008
#4
  • Dec 8, 2008
  • #4
i haven't noticed any problems but a few turns from the starter to get it to start up. at first i thought it was just the cold weather but then i started the engine while it was hot and it still took a few turns.
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 8, 2008
#5
  • Dec 8, 2008
  • #5
Was any work done on car like any previous codes were fixed?
 

red93gthb

New Member
Nov 1, 2008
0
0
0
Suwanee, Georgia
Dec 8, 2008
#6
  • Dec 8, 2008
  • #6
i have no idea i just got the car about a month ago. should i take my starter to get checked just in case?
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 8, 2008
#7
  • Dec 8, 2008
  • #7
Is or Was check engine lite on . If work was done before your purchase they might be false now .as to restarting every ford ive owned did that .what is cca of battery . I allway put 1000 cca in the older cars ive had
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
212
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
386
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
W
I need a 1997 Mustang PATS A expert!
  • Wolfdogg
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
196
1996 - 2004 SN95 Mustang -General/Talk- Oct 5, 2026
Noobz347
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
514
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?