• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Pulled the codes, help!

  • Thread starter Thread starter TheDamned
  • Start date Start date Jun 26, 2007

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Jun 26, 2007
#1
  • Jun 26, 2007
  • #1
Hey guys,

Finally pulled the codes, keep in mind that I have NO CATS since I sport an O\R H-pipe. I also got backfires like crazy when on decal.

I got no codes on KOER test but on KOEO I got these:

181 - Fuel system at rich adaptive limit at partial throttle / system lean.
189 - Fuel system at rich adaptive limit at partial throttle / system lean
327 - EGR valve position circuit below minimum voltage.
332 - Insufficient EGR flow detected

What the hell is the EGR and how can I fix those damn codes ?

Thanks for the help!
 

go-stang5.0

New Member
Jan 27, 2003
2,244
0
0
Glenview,Il
Jun 26, 2007
#2
  • Jun 26, 2007
  • #2
Cant help with fuel issues...but the egr valve is on the passenger side attached to the intake. there should be a tube going from the pass. side exhaust manifold to a rusty thing (well mine was covered in rust so I dunno what color its supposed to be) attached to the intake. Thats the Exhaust Gas Recirculation Valve....hence the name. Anyways the last two codes are saying your egr valve isnt opening enough, and consequently there is a lack of egr flow. You can try removing it and cleaning it and cheching the actuation of the valve...hopefully that will work. If not you will have to get a new one. There about $50 if I remember correctly......Try rockauto.com they have great prices.
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Jun 26, 2007
#3
  • Jun 26, 2007
  • #3
go-stang5.0 said:
Cant help with fuel issues...but the egr valve is on the passenger side attached to the intake. there should be a tube going from the pass. side exhaust manifold to a rusty thing (well mine was covered in rust so I dunno what color its supposed to be) attached to the intake. Thats the Exhaust Gas Recirculation Valve....hence the name. Anyways the last two codes are saying your egr valve isnt opening enough, and consequently there is a lack of egr flow. You can try removing it and cleaning it and cheching the actuation of the valve...hopefully that will work. If not you will have to get a new one. There about $50 if I remember correctly......Try rockauto.com they have great prices.
Click to expand...

Thanks dude i'll check it out!

Anyone has other inputs ?
 
R

red95gtconvert

New Member
May 29, 2006
382
0
0
Ponca city, OK
Jun 26, 2007
#4
  • Jun 26, 2007
  • #4
I ran an offroad H on my car for a while and the whole time it was on I would get random misfires and had bucking problems. I put my factory H back on and all of these issues went away, now my cars rear end decided to start making noise
 

go-stang5.0

New Member
Jan 27, 2003
2,244
0
0
Glenview,Il
Jun 26, 2007
#5
  • Jun 26, 2007
  • #5
Oh and have you checked the fuel pressure...about the lean issue. Could be something as simple as a clogged fuel filter, or a bad FP regulator. Check system pressure. With the car running and vac. hose disconnected from the regulator the fp should be 32-38psi on the stock regulator. with the hose attached it should be something less than that (varies with engine vaccum). YOu can rent a fp gauge from the autoparts store and theres a service port on the passenger side fuel rail that you can attach it to. I believe it has a black plastic cover on it. Either way its a schrader valve similar to an air valve in your wheel but larger. Good luck...let us know what you find.
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Jun 26, 2007
#6
  • Jun 26, 2007
  • #6
thanks alot for the very good infos man, i'll def check it out soon enough.

red95gt: eeek, sorry to hear about the rear-end noise
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jun 26, 2007
#7
  • Jun 26, 2007
  • #7
clean your maf
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Jun 27, 2007
#8
  • Jun 27, 2007
  • #8
bimmertech said:
clean your maf
Click to expand...

also a good call
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
Jun 27, 2007
#9
  • Jun 27, 2007
  • #9
Will do.
 
You must log in or register to reply here.

Similar threads

G
Help! 93 Mustang 2.3L A4LD dies at idle
  • goofyfoot53
  • Nov 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
150
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 17, 2025
goofyfoot53
G
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
884
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
358
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
763
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
F
Running rich with codes,
  • FiveOhGabe
  • Oct 5, 2023
  • 1994 - 1995 Specific Tech
Replies
4
Views
2K
1994 - 1995 Specific Tech Oct 6, 2023
FiveOhGabe
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?