Pulley Install

[00GTpony]

Installing march underdrive pulleys tomarrow... How difficult?...... any advice?

 

[97speedster]

Make sure you don't install your piggyback to close to the block when you tighten it on the crank.

 

[Kilgore Trout]

Sell the pullies on eBay and use the money to buy gas and take your woman out on a date.

 

[kstng50]

make sure you get the washer out when your taking off the crank pulley

 

[BCB00GT]

Use a new crank bolt.

 

[Turbo92PGT]

get a longer bolt and some washers to use when installing the crank pulley.

Trust me. I JUST installed a set on my car. I put the pulley in boiling water for about 20 minutes and had no luck.

Using a longer bolt to pull the crank pulley onto the crank works great.

Andy

 

[topless98gt]

Here's a write-up: http://www.mustangworld.com/ourpics/fcar/pull1.htm

Be sure to follow the instructions. sicK96GT installed his in about 2 hours. He said he had no trouble at all following those directions.

P.S. Get the good harmonic balancer puller tool...the kind that has an installer too! $86 to rent at Advanced Autoparts.