T tim_lemmy New Member Dec 13, 2007 94 0 0 Jan 23, 2008 #1 Jan 23, 2008 #1 Anybody know where i can get a set of underdrive pulleys for a 2.3? the only ones i seem to be able to find are for 5.0 motors
Anybody know where i can get a set of underdrive pulleys for a 2.3? the only ones i seem to be able to find are for 5.0 motors
Red_LX I’m not much help unless you’re looking for ****! Founding Member Nov 29, 1999 5,896 73 129 Morgantown, WV...where couches meet their doom Jan 23, 2008 #2 Jan 23, 2008 #2 Racer Walsh makes some (crank and alternator only), but save your money, they aren't worth buying.
T tim_lemmy New Member Dec 13, 2007 94 0 0 Jan 23, 2008 #3 Jan 23, 2008 #3 what about a rebuild kit for the engine? it's got almost 200k miles and it needs a rebuild
Red_LX I’m not much help unless you’re looking for ****! Founding Member Nov 29, 1999 5,896 73 129 Morgantown, WV...where couches meet their doom Jan 24, 2008 #4 Jan 24, 2008 #4 You can get rebuild kits anywhere...any auto parts store, advance auto parts, etc.
T tim_lemmy New Member Dec 13, 2007 94 0 0 Jan 28, 2008 #5 Jan 28, 2008 #5 I was looking for a brand recommendation sorry for not specifying
Red_LX I’m not much help unless you’re looking for ****! Founding Member Nov 29, 1999 5,896 73 129 Morgantown, WV...where couches meet their doom Jan 28, 2008 #6 Jan 28, 2008 #6 Well everybody has pretty much the same crap as far as the 2.3 goes...usually Fel-Pro gaskets, and Sealed Power or Federal Mogul rings & bearings.
Well everybody has pretty much the same crap as far as the 2.3 goes...usually Fel-Pro gaskets, and Sealed Power or Federal Mogul rings & bearings.
M muskrat2.3 New Member Jan 22, 2008 11 0 0 Jan 28, 2008 #7 Jan 28, 2008 #7 It really depends on your intentions with the car. if you are not gonna go all out with it . then most auto parts store rebuild kits will do! Pulleys don't really do much especially on a 2.3. make sure to do a valve job !
It really depends on your intentions with the car. if you are not gonna go all out with it . then most auto parts store rebuild kits will do! Pulleys don't really do much especially on a 2.3. make sure to do a valve job !
Red_LX I’m not much help unless you’re looking for ****! Founding Member Nov 29, 1999 5,896 73 129 Morgantown, WV...where couches meet their doom Jan 28, 2008 #8 Jan 28, 2008 #8 A parts store rebuild kit kinda has to do, because you won't find most of the stuff anywhere else.