• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

pulling right...

  • Thread starter Thread starter BREDn07
  • Start date Start date Aug 15, 2007

BREDn07

New Member
Mar 30, 2007
54
0
0
Fresno, Ca
Aug 15, 2007
#1
  • Aug 15, 2007
  • #1
put the camber bolts and got it aligned, before i put the bolts it was starting to pull right, just a little though...now i can feel the tension towards the right a little more.

this is my theory: i have inside tire wear on the right side not a whole lot but a liitle more than the left side, so i'm thinking that's the cause or would camber plates fix the problem. i got it align, the tech said its not totally straight but better than when i brought it in...i'm thinking too, that i might need new a tire!

has anybody faced the same problem...
 
P

plnfixr320

New Member
Jul 9, 2007
55
0
0
High Desert CA
Aug 15, 2007
#2
  • Aug 15, 2007
  • #2
You could need a tire, if your tires are not directional try switching the front tires and take a test drive. If you pull left the buy some tires, if you still pull right put the tires back and go to the shop for a re-check. Ask for the print out of alignment (if theres nothing to hid they wont have a problem).

Camber will not make a car pull, Caster will. You caster should be about 0.4 deg more postitive on the right to make the car pull left (this comps for the road crown).

Camber will wear you tires as you described, and a worn tire can pull. Most likely you have a tire pull.

Hope this helps you a bit, happy motoring!
 
You must log in or register to reply here.

Similar threads

L
Door pull panels, convertible versus coupe
  • lenzgt
  • Jun 25, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
182
1994 - 1995 Specific Tech Jun 25, 2026
lenzgt
L
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
309
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
Foxbody adjust alignment
  • Creomod
  • Jun 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 14, 2025
2000xp8
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
320
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Brake pad and rotor upgrade
  • Sparky714
  • Aug 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
559
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Sparky714
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?