pulling right...

[BREDn07]

put the camber bolts and got it aligned, before i put the bolts it was starting to pull right, just a little though...now i can feel the tension towards the right a little more.

this is my theory: i have inside tire wear on the right side not a whole lot but a liitle more than the left side, so i'm thinking that's the cause or would camber plates fix the problem. i got it align, the tech said its not totally straight but better than when i brought it in...i'm thinking too, that i might need new a tire!

has anybody faced the same problem...

 

[plnfixr320]

You could need a tire, if your tires are not directional try switching the front tires and take a test drive. If you pull left the buy some tires, if you still pull right put the tires back and go to the shop for a re-check. Ask for the print out of alignment (if theres nothing to hid they wont have a problem).

Camber will not make a car pull, Caster will. You caster should be about 0.4 deg more postitive on the right to make the car pull left (this comps for the road crown).

Camber will wear you tires as you described, and a worn tire can pull. Most likely you have a tire pull.

Hope this helps you a bit, happy motoring!