hey guys i have a 1989 5.0 and havent had any problems with it until i installed subframe connectors, lower control arms, torquebox reinforcements. now the car completely jerks itself out of the lane (to the right) when i punch the gas, i can counter this by pulling the steering wheel to the left but as soon as i let off the gas and the car settles back down, it pulls slightly back to the left and i have to recompensate with the steering wheel again, this only happens dramatically if i go full throttle, but it happens anywhere in the entire speed band, i also just replaced the drivers side tie-rod because my driver's side tire is getting wear on the outer tread. it still is being worn down even after replacing the tie rod. can anyone help me figure out what the prblem may be? i dont want to have to keep replacing tie rods if the problem is elsewhere. does the front end need more support now after the lower control arm and subframe install, or has something more serious already been damaged? it feels more like the body of the car is loose and twists and the wheels follow, instead of the steering itself pulling the car. i was thinking of just throwing on a strut tower brace to even the car out, but want to take care of this problem first for sure instead of just experimenting with parts and hoping it works. thanks for any advice or experience you guys have with this issue. also the car is a convertible