push rod help!

[thestallionx]

i need to get a new set of push rods, but i dont know what kind or size to get. i am running afr 185 and an e cam. how do u know what size to get?

 

[mike93lx]

every setup is different. you're best bet is to buy an adjustable length rod from summit, comp, crane, etc and adjust until your geometry is correct.

 

[earleys94gt]

Try this http://cranecams.com/?show=faq&id=6

You could also contact AFR or Ford Racing and see what the say.

 

[Fast63]

If the heads have not been milled, the block not decked, using stock lifters, using a normal head gasket thickness, you should be able to use stock length pushrods. I would also call AFR and ask them. The E-303 is no different than the stock cam dimensionally.