stang89bidges Advanced Member Mar 14, 2014 727 144 74 Fort Worth Texas May 14, 2015 #1 May 14, 2015 #1 Is it normal to see a change in pushrod length from stock 6.272 down to 6.100 with new aluminum cylinder heads and 1.6 rockers? Stock bottom end. No deck milling, no cylinder head milling.
Is it normal to see a change in pushrod length from stock 6.272 down to 6.100 with new aluminum cylinder heads and 1.6 rockers? Stock bottom end. No deck milling, no cylinder head milling.
liljoe07 5 Year Member Feb 18, 2009 1,622 363 124 Cartersville,Ga May 14, 2015 #2 May 14, 2015 #2 Normally, no. Typically the pushrods will be longer.
mikestang63 SN Certified Technician Aug 27, 2012 11,606 8,859 214 In the garage May 14, 2015 #3 May 14, 2015 #3 6.4-6.5 with aftermarket inline heads 6.7-6.8 with TFS heads
liljoe07 5 Year Member Feb 18, 2009 1,622 363 124 Cartersville,Ga May 14, 2015 #4 May 14, 2015 #4 mikestang63 said: 6.4-6.5 with aftermarket inline heads 6.7-6.8 with TFS heads Click to expand... Depends on which TFS heads, the 11R heads use an even longer pushrod than the old Twisted Wedge heads. 11R will be over 7.00". Reactions: A5literMan
mikestang63 said: 6.4-6.5 with aftermarket inline heads 6.7-6.8 with TFS heads Click to expand... Depends on which TFS heads, the 11R heads use an even longer pushrod than the old Twisted Wedge heads. 11R will be over 7.00".
mikestang63 SN Certified Technician Aug 27, 2012 11,606 8,859 214 In the garage May 14, 2015 #5 May 14, 2015 #5 liljoe07 said: Depends on which TFS heads, the 11R heads use an even longer pushrod than the old Twisted Wedge heads. 11R will be over 7.00". Click to expand... Thanks Joe. You are correct. I was reffering to the TW 170 or 190 old heads.
liljoe07 said: Depends on which TFS heads, the 11R heads use an even longer pushrod than the old Twisted Wedge heads. 11R will be over 7.00". Click to expand... Thanks Joe. You are correct. I was reffering to the TW 170 or 190 old heads.