Quad shock mount help!

Burn'nRubber

New Member
Feb 25, 2008
8
1
1
Here is a little background to my problem. I installed a set of new tubular u/l control arms(summit brand) on my car. After the install I ditched the quads, thinking I wouldnt need them anymore. Well the car wheel hopped, so I was told that my shocks could be tweaked, so I went ahead and installed a new set of lakewood 50/50s. Although it helped, wheel hop is still evident so I figured I would put a new set of quads on and finally eliminate the problem.

While trying to install my new quad shocks, I ended up stripping out one of the bolts that fasten the quad shock mount to the frame rail because I didnt have the right hardware. After trying a drill and an easy out I still can not get it out. So I was wondering if I could bolt the quad shock mount down towards the rear of the car, and where the bolt is stripped just weld the mount to the frame rail?????

Also does anybody know what kind of bolts are supposed to fasten down the quad shock mounts because I need to get some new ones. I really need to start labeling this kind of stuff....

Thanks!
 
I believe the stock mounting hardware is metric, 10mmX1.5 is the bolt size. Just a side note, it you had purchased a set of adjustable upper control arms, and then set your pinion angle to 1 1/2 to 2 degrees of pinion down angle, you would not have wheel hop and would not need quad shocks. At least that has been my experience.:D
 
I have no quads, but HPM Mega Bite Jr's on my 81 notch on the upper mounting hole. Steeda Sport Springs and stock used shocks. I have 285-40-17 F1's and no wheel hop.

I have no quads, but Pro-Form LCA's and UCA's on my 91 notch. Stock springs, stock used shocks. I had 245-45-17's BFG KDW's on ther back and still had some wheel hop. I just mounted up some 245-45-17 Goodyear Eagle ZR's and the wheel hop is gone.

So for me, it was bad tires.
 
yes, one of the bolts is welded to the frame! I almost stripped one of my bolts when i flipped the quad shocks. I flipped them to fit bigger tires, that will help on some wheel hop. But now they are rubbing on my shocks. Good luck!
 
I have used hpm mega bite jr's on the lower hole. Stock springs, stock 180k shocks. no quads. No wheel hop with kuhmo tires.

Currect car set up is. 92 gt. Toxico shocks and springs, Lakewood traction action lcas set on bottom hole, bfg drag radials. No wheel hop, pulls 1.7 60's very easy. no quads either. Has 1.6's in it if I can get the turn right to launch it correctly.

I second adding uppers and maybe swapping tires. I know my 04 gt stock goodyears were terrible, put sumitomo Htr2's on and it was a whole new car.