• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Quad shocks causing vibration?

  • Thread starter Thread starter stang1986GT
  • Start date Start date Jan 5, 2009

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Jan 5, 2009
#1
  • Jan 5, 2009
  • #1
I put new tires on the rear of my 86 GT and I noticed the drivers side quad shock bushing is shot on both ends. I've posted before about a vibration once in a while in the back that sounds like you are running on rumble strips...happens at different times, different speeds. Would the bushing cause my problem?

I know that some people take them off, but everything is stock and I'm not comfortable taking them off. I assume if I'd put a GOOD set (KYB's?) of shocks on the back I could remove them? Otherwise, should I just get new bushings? I just need to fix it as low cost as possible as the car needs other things just to keep it on the road.

Thanks.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jan 5, 2009
#2
  • Jan 5, 2009
  • #2
The quads are cheap man. At the auto parts store you will confuse them calling them quad shocks. Try "axle dampeners". Or as many have done before, just lose them.
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 5, 2009
#3
  • Jan 5, 2009
  • #3
New tires? Sometimes the raised letters on the back of my tires rubs the tailpipe on curves at speed.

You can get new quads at Autozone they're listed under "steering damper".
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Jan 5, 2009
#4
  • Jan 5, 2009
  • #4
LiquidGT said:
New tires? Sometimes the raised letters on the back of my tires rubs the tailpipe on curves at speed.

You can get new quads at Autozone they're listed under "steering damper".
Click to expand...

No, it's not the tires. It's been doing this vibration thing for a long time. It had two different vibrations...one like I described, and then the whole car shaking at higher speeds. The new tires fixed the whole car shaking problem because the old tires were all dry rotted, hard, and had high spots.

I was just wondering if the bushing in the quad could be causing the vibration. I am going to replace them anyway...but just curious.

Auto Zone lists rear end quad shocks as steering dampers? Strange.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jan 5, 2009
#5
  • Jan 5, 2009
  • #5
I don't recall that there are bushings on the quads


Been a while tho. The quads are simply there to keep wheel hop down. My personal experience is that they don't cause problems. Brakes in good shape? Bearings?
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 5, 2009
#6
  • Jan 5, 2009
  • #6
Yep bushings are on the quads, and mine have seen better days. lol

The driveshaft is a common cause of vibration, it's one of the main reasons people go to aluminum.

Still have the dog bone on the axle? It's supposed to dampen axle vibrations, but been debated whether it does anything or not.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jan 5, 2009
#7
  • Jan 5, 2009
  • #7
Instead of the bushings being the cause of the vibration, maybe they are the result??

I'd guess bad wheel bearing on that side of the car
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jan 6, 2009
#8
  • Jan 6, 2009
  • #8
+1

Check those bearings man YOU DO NOT WANT IT TO FREEZE UP
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Jan 6, 2009
#9
  • Jan 6, 2009
  • #9
Sounds to me like you have bad u joints or an unbalanced driveshaft.
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Jan 7, 2009
#10
  • Jan 7, 2009
  • #10
Mustang5L5 said:
Instead of the bushings being the cause of the vibration, maybe they are the result??

I'd guess bad wheel bearing on that side of the car
Click to expand...

Yea, I thought about that too. But it only does it once in a while. I was thinking the bushings because maybe they get bound up once in a while or something causing the rear to be off a little. Unlikely, but who knows. I just need to take a day, replace those things, and check the UCA and LCA bushings and the bearings and get it figured out once and for all.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Jan 7, 2009
#11
  • Jan 7, 2009
  • #11
I've had the driving on rumble strips thing happen to me.
And it was in fact the driveshaft/u joints.
Not sure which one, i bought a FMS driveshaft.
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Jan 7, 2009
#12
  • Jan 7, 2009
  • #12
Good to know...
 
You must log in or register to reply here.

Similar threads

Suspension Quad shocks
  • keel
  • May 20, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
36
Views
1K
Fox 5.0 Mustang Tech Sep 2, 2026
AeroCoupe
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
703
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
457
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
378
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
331
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?