93 cobra water pump pulley. Grind the pin or do what I did and sscribe it and move the tensioner hole one slot up . You need a smog delete pulley with the blower bracket or the belt will hit the bracket bolts and support. I have a renegade bracket now but had the standard in the past . Just did the factory ac delete setup . Belt is 80.5 and tight you have to jump it on but this the way to make it happen . You see what I did on the tensioner I was testing what worked . You want a hole closest to the original as possibleSo I think i may be making a deal on a V-3 kit for my car. I was reading through the manual and noticed they show belt routing for A/C cars with smog pumps. My car has no smog and is a factory NO A/C car, It looks like there will be interference with the water pump at a minimum. Possibly the alt. could be mounted where the smog pump would go but not sure. How are you guys solving this issue?
Thanks!
Speeds it up . Smaller pulley will spin the water pump faster@TOOLOW91 Thanks for the info!! Exactly what i need. I do have a delete pulley bracket laying around so I wont need to get one. Does the cobra pulley slow down the water pump? I assume you're not having cooling issues.
Thanks!
Speeds it up . Smaller pulley will spin the water pump faster
Nope a little tricky to figure out at first but after talking to the right people what I gave you works . Most guys shy away from the factory ac delete like I did for a long time Cuz is this . Not having another idler really cleans things upduh, ya that makes sense!
well I'm glad there's a simple solution. Was thinking i may have to fab up something.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?