• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Question About Injector Wiring.

  • Thread starter Thread starter Z28-STANG
  • Start date Start date Apr 11, 2006

Z28-STANG

New Member
Aug 28, 2004
7
0
0
Apr 11, 2006
#1
  • Apr 11, 2006
  • #1
The wife's car (89 GT) is having a problem starting. It is getting spark but, no fuel. I have checked the injector wiring and have found that both wires going to each injector has 12 volts. I was under the impression that only one wire had 12 volts and the other was a ground going back to the computer. Did I misread? Are both wires at the connector supposed to have 12 volts constant? If not is this a wiring problem or a computer problem? I swear this thing is getting closer and closer to being carbureted each day.
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Apr 11, 2006
#2
  • Apr 11, 2006
  • #2
oh sorry i guess i didnt read at good
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 11, 2006
#3
  • Apr 11, 2006
  • #3
You are correct. The injectors get 12 volts with the key on (constant voltage) from the EEC relay. The computer uses pulsed ground to actiuate the injectors. It's easier for ground to be modulated by the puter for injector pulsewidth, etc.
 

Z28-STANG

New Member
Aug 28, 2004
7
0
0
Apr 11, 2006
#4
  • Apr 11, 2006
  • #4
You are correct. The injectors get 12 volts with the key on (constant voltage) from the EEC relay. The computer uses pulsed ground to actiuate the injectors. It's easier for ground to be modulated by the puter for injector pulsewidth, etc
Click to expand...

So what would cause both wires to get constant 12 volts?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 11, 2006
#5
  • Apr 11, 2006
  • #5
Z28-STANG said:
So what would cause both wires to get constant 12 volts?
Click to expand...
The red wire on the injectors is energized anytime the ignition switch is in the Run position.

You will read 12 volts on the ground lead until the computer pulses and switches it to ground. That pulse is only a few milliseconds wide, so a voltmeter would never see it. You need a Noid light (available at most auto parts stores) or an osilloscope to see the pulse.

If you use a Noid light and don't see it flash, when you crank the engine with the ignition switch, then you have either computer or wiring problems with the 10 pin connectors.
 
You must log in or register to reply here.

Similar threads

M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
520
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
688
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
G
2000 GT- Alternator not charging
  • grugug
  • Nov 10, 2026
  • SN95 4.6L Mustang Tech
Replies
10
Views
129
SN95 4.6L Mustang Tech Nov 12, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?