I need to know if the stock lower intake for a SN95 is the same as the fox. I know the upper is different but what about the lower? The reason I ask is I'm thinking about picking up a used lower for dirt cheap and getting it ported. Only thing is, it' off a fox. Will it work?
ok i have another, it will fit but are they the same port wise etc.. Also i understood that ford put the intake thats on there on there b/c of hood cleareance issues, will the stock hood and strut tower brace clear the stock hood
are you guys absolutely sure it will work? this warning is on Tmoss' website:
CAUTION: Be sure to buy an intake that matches your year car – the 94-95 intakes do not have the EGR coolant line and the ACT holes drilled and tapped into them like the 87-93 intakes.
Our cars do not need the EGR and ACT holes that the Fox cars do. The fox manifold will work. The lower is the same from 87-95. The only difference is the upper. PM Tmoss just to make sure, I'm 99% sure though.
Our cars do not need the EGR and ACT holes that the Fox cars do. The fox manifold will work. The lower is the same from 87-95. The only difference is the upper. PM Tmoss just to make sure, I'm 99% sure though.
Joe is right - the ACT and EGR coolant holes are not drilled and tapped in the 94-95 intakes. You guys can use the 87-93 lowers, you just have to plug those two holes. The lowers for 86-95 are essentially the same.
Joe is right - the ACT and EGR coolant holes are not drilled and tapped in the 94-95 intakes. You guys can use the 87-93 lowers, you just have to plug those two holes. The lowers for 86-95 are essentially the same.