• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

question about vacuum lines

  • Thread starter Thread starter PeteyAce
  • Start date Start date Mar 24, 2007

PeteyAce

Member
Jul 2, 2004
346
0
17
Mar 24, 2007
#1
  • Mar 24, 2007
  • #1
what are the exact purpose of vacuum llines? also i have a yellow one by my radio thats not connected. anyone know where that would go to? also think i have a vacuum leak, when i shift in higher rpm range (this only happens in warmer weather) i hear a whistle noise, where is a good place to start looking for that leak?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 24, 2007
#2
  • Mar 24, 2007
  • #2
The vacuum line in the passenger compartment opeate the heat, vent & A/C system

Diagram courtesy of Tmoss & Stang&2birds



See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/ Everyone should bookmark this site.

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg
 

Attachments

  • Mustang_AC_heat_vacuum_controls.gif
    17.8 KB · Views: 307

PeteyAce

Member
Jul 2, 2004
346
0
17
Mar 24, 2007
#3
  • Mar 24, 2007
  • #3
is it possible to lose hp from a vacuum leak?
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Mar 25, 2007
#4
  • Mar 25, 2007
  • #4
if an engine isn't running right such as vacuum leak then your not going to get peak hp so i'll say your losing hp.

the yellow vacuum line goes to a cannister that's on the back side of the dash just to the left of your radio.
 
You must log in or register to reply here.

Similar threads

D
Please help with vacuum lines
  • Dawgs000082
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
250
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
Dawgs000082
D
Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
587
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
E
Chasing Vacuum leak 99 GT
  • EBNS_2005
  • May 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
273
1996 - 2004 SN95 Mustang -General/Talk- May 3, 2026
X-cam34
X
B
2001 v6 New compressor issue
  • badmech
  • Apr 30, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
171
SN95 V6 Mustang Tech Apr 30, 2026
badmech
B
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
643
Fox 5.0 Mustang Tech Jun 21, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?