QUESTION NEED AWNSER ASAP. (how much to chop off springs for 1/2" drop)

[91LX_5L]

How much should I chop off my eibach pro springs for about a 1/2" drop. 3/4 coil?

 

[EpiKk3]

Can't answer the question sorry to get your hopes up.. but why in the world are you cutting eibachs?

 

[91LX_5L]

Because they sit dead even, front looks higher then the rear. I was thinking of more like 1/2 coil which is pretty much the dead coil anyways.

 

[RIO5.0]

I cut my Macs...1/2 coil was 1/2" drop for the front.....1 full coil was worth 1" in the rear....
Hopefully you got decent struts/shocks as the rides gonna firm up and spanked out S/S are gonna show up with a chittier ride....you 'll notice a dif in the handling to....

Dont forgot to compensate for the rear drop by adjusting the pinion snubber accordingly....otherwise she'll be hitting hard from bottoming out on the snubber...you may need to cut a 1/2" of rubber off to start ??...I would assume you have a shorter snubber from when the Eibach's went in??

 

[EpiKk3]

Because they sit dead even, front looks higher then the rear. I was thinking of more like 1/2 coil which is pretty much the dead coil anyways.

Good enough reason .. Mine sits the same unfortunately

 

[91LX_5L]

Ok 1/2 coil it is thanks!

 

[94-302-vert]

I would do a half max then try it, then go for more if needed.

Or even get height measurements, cut a 1/4" then reinstall and measure.. Then see where that leaves you and if you want lower.

Remember you can't go back after cutting your springs.

Chris