question on 94 stock mustang heads

derrick2119

New Member

Mar 10, 2009

19

0

0

Jul 1, 2009

#1

• Jul 1, 2009

• #1

Does anyone know how many cc the stock heads are? Im looking at a set of flat top forged pistons and it says with a 58.2 cc head it puts out 10.13:1 compression...Im planning on having the block decked .020 and possibly the heads milled .020 also...hoping to get higher compression...w/o breaking the bank!

 

Dino Dino Bambino

15 Year Member

Jun 13, 2007

1,672

89

79

Cyprus

Jul 1, 2009

#2

• Jul 1, 2009

• #2

The chambers in the stock E7TE's are roughly 62cc.

 

derrick2119

New Member

Mar 10, 2009

19

0

0

Jul 1, 2009

#3

• Jul 1, 2009

• #3

Bullitt95 said:

The chambers in the stock E7TE's are roughly 62cc.

Click to expand...

any idea what it will take my compression to?

 

Dino Dino Bambino

15 Year Member

Jun 13, 2007

1,672

89

79

Cyprus

Jul 2, 2009

#4

• Jul 2, 2009

• #4

9.65:1 without decking the block/heads. Each 0.010" decked from the block increases the CR by 0.20:1 and decking the heads by the same amount increases the CR by 0.13:1.

 

Venom351R

Founding Member

Apr 27, 2002

4,548

41

98

MAINE

Jul 2, 2009

#5

• Jul 2, 2009

• #5

why are you doing forged pistions and keeping the stock heads? Are you doing to work yourself?

 

Zero Signal

Active Member

Feb 24, 2003

2,633

2

46

Tucson, AZ

Jul 2, 2009

#6

• Jul 2, 2009

• #6

Sounds like he's building a nice short block now since it may need a rebuild anyway. THen do nice heads later? That's what I would do.

 

derrick2119

New Member

Mar 10, 2009

19

0

0

Jul 2, 2009

#7

• Jul 2, 2009

• #7

Yeah im doing a short block right now...thinking about a set of trick flow heads down the road but have been told that AFR heads are better by a few people. Sat down and done the math by the time i get all the machine work done on stock heads i could have a nice set of aluminum heads

 

derrick2119

New Member

Mar 10, 2009

19

0

0

Jul 3, 2009

#8

• Jul 3, 2009

• #8

Noticed you said you had the AFR heads do they put out as mush as the trick flow twisted wedge heads?

 

derrick2119

New Member

Mar 10, 2009

19

0

0

Jul 3, 2009

#9

• Jul 3, 2009

• #9

the aboe question was for Venom351R