questions about pi head swap

Dope 97GT · Sep 12, 2005

I have a 97 gt and i want to do the pi head swap and have just about every bolt on. I just bought the car the way it sits with all the bolt ons on it and its not nearly fast enough. i was wondering who has the best pi heads for the money. i want some that are ported and assembled. i was looking at the gtr high performance ad and they have a stage 2 head kit but i dont know anything about it. If anyone has done it or have some knowledge on who has the best assembled heads let me know.

crazynorwegian · Sep 12, 2005

mph
a bit pricey, but the they are pretty much the best flowing p&p heads on the market for gt's. plus there is no core charge

www.modularpowerhouse.com

GT 5spd · Sep 12, 2005

www.steenracing.com

I know they P&P but not sure about if they asseble them....

DropTopPony · Sep 12, 2005

above are both good, also www.vtengines.com and fox-lake

ADRENLN · Sep 12, 2005

i got my foxlake heads all assembled and ready to bolt in. ofcourse i paid top dollar to have them assembled, and fox isnt cheap to beginwith.

vt ad foxlake are the same, fox ports for both companies. just to let u know.

i got a custom stage 1 blower cam, which gets less power then regular cams. i picked up 35rwhp and 21 rwtq. that is over my previous pi heads, you will gain alot more over your non pi set up.

MyEarsHurt · Sep 12, 2005

Dont bother with the port and polish, it wont add more than 10-15 as opposed to regular PI heads...unless you are gonna run a power adder in the future. A better investment would be stock PI heads, a VT stage 2 cam, and some LT's. All that together will still be cheaper than a port and polish pi head and end up giving you way more power.

Dope 97GT · Sep 12, 2005

thanks for all the input guys

TweekedGT · Sep 12, 2005

MyEarsHurt said:
Dont bother with the port and polish, it wont add more than 10-15 as opposed to regular PI heads...unless you are gonna run a power adder in the future. A better investment would be stock PI heads, a VT stage 2 cam, and some LT's. All that together will still be cheaper than a port and polish pi head and end up giving you way more power.

That's what I've got. I'm close to 300rwhp now.

tomustang · Sep 13, 2005

might as well throw a nitrous kit on afterwards if you need more power

questions about pi head swap

Dope 97GT

New Member

crazynorwegian

GT 5spd

New Member

DropTopPony

Noob Slayer

ADRENLN

Active Member

MyEarsHurt

New Member

Dope 97GT

New Member

TweekedGT

New Member

tomustang

Psychotic Member

Similar threads

questions about pi head swap

New Member

New Member

Noob Slayer

Active Member

New Member

New Member

New Member

Psychotic Member

Similar threads

Privacy & Transparency

Privacy & Transparency