P powershift46 Founding Member Apr 22, 2002 366 0 17 NW IA Apr 23, 2010 #1 Apr 23, 2010 #1 can I use a v6 car as a doner for a five lug swap? just need v8 axles, correct?
tims 86 Member Apr 19, 2009 187 0 16 pittsburgh,pa Apr 23, 2010 #2 Apr 23, 2010 #2 what are you swapping too and from?
P powershift46 Founding Member Apr 22, 2002 366 0 17 NW IA Apr 23, 2010 #3 Apr 23, 2010 #3 96 v6 to 91 5.0
lancec2c30 Member May 14, 2008 570 0 16 Washington Apr 23, 2010 #4 Apr 23, 2010 #4 That's a bad year to try and use. 96 year spindles put the front tires out way too far. And I believe the booster had a different rod that mounts to the pedal assembly.
That's a bad year to try and use. 96 year spindles put the front tires out way too far. And I believe the booster had a different rod that mounts to the pedal assembly.
tims 86 Member Apr 19, 2009 187 0 16 pittsburgh,pa Apr 23, 2010 #5 Apr 23, 2010 #5 you need to use 94-95 front spindles, 96 and on i believe makes the steering a problem, and i think the rear is a little wider?
you need to use 94-95 front spindles, 96 and on i believe makes the steering a problem, and i think the rear is a little wider?
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,368 18,115 224 Massachusetts Apr 24, 2010 #6 Apr 24, 2010 #6 You need 94-98 axles...doesn't matter v6 or v8 same thing. Take the spindles and sell them and get 94-95 spindles
You need 94-98 axles...doesn't matter v6 or v8 same thing. Take the spindles and sell them and get 94-95 spindles
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,368 18,115 224 Massachusetts Apr 24, 2010 #7 Apr 24, 2010 #7 And you will need mc and booster off 94-95