• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Quick Nitrous Express Question

  • Thread starter Thread starter nick6704
  • Start date Start date Oct 5, 2006
N

nick6704

New Member
Sep 7, 2004
47
0
0
Oct 5, 2006
#1
  • Oct 5, 2006
  • #1
Does anyone have a picture of the NX Fuel Rail Adapter installed on an '04 GT? I'm ordering mine this week, and I'd just like to get an idea of how it works before it gets here. Also, for a 100 shot, does anyone know where and which NX jet kit I should buy? I'd like to jet the setup for 75 to start and test and then up it to 100. I bought my kit used so it's missing some parts if anyone's wondering why I'm asking these questions. Thanks!!!
 

LaserRed01GT

Banned
Oct 3, 2006
739
3
0
Clearwater, FL
Oct 5, 2006
#2
  • Oct 5, 2006
  • #2
nick6704 said:
Does anyone have a picture of the NX Fuel Rail Adapter installed on an '04 GT? I'm ordering mine this week, and I'd just like to get an idea of how it works before it gets here. Also, for a 100 shot, does anyone know where and which NX jet kit I should buy? I'd like to jet the setup for 75 to start and test and then up it to 100. I bought my kit used so it's missing some parts if anyone's wondering why I'm asking these questions. Thanks!!!
Click to expand...

I'll get you a pic when I get home later this afternoon. It's a very straightforward installation.
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
Oct 5, 2006
#3
  • Oct 5, 2006
  • #3
install. takes all of 5 minutes.

 

Attachments

  • 10-05-06_1418.webp
    29.6 KB · Views: 103
  • 10-05-06_1419.webp
    28.1 KB · Views: 120

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Oct 5, 2006
#4
  • Oct 5, 2006
  • #4
nick6704 said:
Does anyone have a picture of the NX Fuel Rail Adapter installed on an '04 GT? I'm ordering mine this week, and I'd just like to get an idea of how it works before it gets here. Also, for a 100 shot, does anyone know where and which NX jet kit I should buy? I'd like to jet the setup for 75 to start and test and then up it to 100. I bought my kit used so it's missing some parts if anyone's wondering why I'm asking these questions. Thanks!!!
Click to expand...

52 (N) 33 (F) is for 100 shot
 
N

nick6704

New Member
Sep 7, 2004
47
0
0
Nov 7, 2006
#5
  • Nov 7, 2006
  • #5
OK, I have my fuel rail adapter, and haven't tried to install it yet, but I can't really tell exactly how it works from the pictures. Sorry for my ignorance, but can someone give me a step by step of how to install it? Is it plug and play or do I have to modify the fuel rail? I've never hooked up anything like this before and I usually don't mess with EFI cars so I'm kind of in the dark. Thanks.
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
Nov 7, 2006
#6
  • Nov 7, 2006
  • #6
Plug and play.
Look on the driver side fuel rail. You see the shiny silver thing with the black square on it? has a connector on the top and a line plugging in on the backside, toward drivers fender.
Unbolt it. Pull it up and out. FUEL will come out.
Slide the NX fuel rail adapter into the hole where the part you just removed was. Slide the boxy thing into the top of the NX fuel rail adapter.
Use the longer bolts supplied by NX to tighten down to the fuel rail.

*** make sure to tighten any unused opening on the NX fuel rail adapter. there should be at least 1 if not 2 cap head screws with it. *****
 
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
685
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
274
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
598
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
211
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?