Quick question (computer)

[boostaddict5_0]

"SEARCHED"

Will a 98 4.6 Gt superchip work on a 95 5.0 computer..if reprogrammed? I know nothing about the Modulars...just wondering if the electric prongs are the same on the computer?

 

[95cobraguy]

i doubt it, 96 and up cars are obd 2.

 

[boostaddict5_0]

I was reading that; Some 1994 and 1995 models had pre-compliance OBD-II systems. I was just wondering if the computers were designed the same IE Prongs. I would reflash the chip with a t4mo bin.

 

[fiveohh94gt]

as far as i know, its ONLY the V6 94-95 models that are OBD-II systems although the V8 models still have the plug under the dash

 

[boostaddict5_0]

I know the OBD is just a plug in, but I know the 4.6 has a EEC. I'm just wondering if it has the same design as the 5.0 EEC.

 

[Black95GTS]

"SEARCHED"

Will a 98 4.6 Gt superchip work on a 95 5.0 computer..if reprogrammed? I know nothing about the Modulars...just wondering if the electric prongs are the same on the computer?

No, it will not work. The 5.0 computer is completely different from the 4.6 computer.

Adam

 

[boostaddict5_0]

Ok then why will a TweecerRt fit on J3 ports 89-2004?

http://tweecer.oplnk.net/viewtopic.php?t=5709&sid=9a43307c9a33bd91c3e1d93146a707d1

 

[urban96]

if you had it reprogrammed i think it should. the SCT chip i have for my 95 looks exactly like the KB chip for the 02... but i would call a SCT dealer to find out first

 

[Black95GTS]

Ok then why will a TweecerRt fit on J3 ports 89-2004?

http://tweecer.oplnk.net/viewtopic.php?t=5709&sid=9a43307c9a33bd91c3e1d93146a707d1

Do you think a computer that controls a 4.6 liter engine with an overhead camshaft is going to use the same programming that a 5 liter hydraulic cam shaft engine uses? The 96 GT uses EECV OBDII while the 5.0 uses EECIV OBDI.

If you think I'm wrong, try to use a tuning strategy on your SN95 with the TWEECER R/T thats not CBAZA. I tried the A9L from a FOX platform on my SN95 and let me tell you I thought my car was gonna explode.

The J3 port is probably the same so that Ford didn't have to modify its test apparatus everytime a new vehicle came out.

adam

 

[Black95GTS]

if you had it reprogrammed i think it should. the SCT chip i have for my 95 looks exactly like the KB chip for the 02... but i would call a SCT dealer to find out first

I believe that this is correct, it makes sense to me. But like urban wisely recommended, a dealer should be contacted.

Sorry for the double posts.

Adam

 

[boostaddict5_0]

Black I totally know that I can't run a 4.6 program on my EEC I was just asking if my buddies Blue superchip would work with a T4mo reflash? I used to have the TweeCer RT. So that being said; the prongs on the back of the EEC are the same all the way up to 2004