quick ? vapor canistor.

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
I'm still working some of the bugs out of my newly purchased 91. I again searched but found info mostly about people removing the system. I have fuel smell problem and found a couple of things.

the vacuum line going under the intake crumbles so I know thats gone, is this standard vacuum line, can I get it from ford or parts store what size is it?

I traced it down to a round looking motor that's plugged in and it doesn't look to healthy either. what the heck is it? and the canistor doesn't look any better. this system is 16yrs old should I replace this stuff, I looked up the canistor online and they go anywhere from $50 and up but they don't list any other parts for the system. I have a buddy who works at ford and he gets me his discount, do you guys think ford still has this stuff like that motor thing what ever the heck it is. I just want some opinions before I spend the money or is not worth messing with and just repair the vacuum hose. thanks again.
 
I had to do some creative splicing on the purge line (what you are describing). At the plenum, it is likely just a short run of hose (that's actually under the plenum) that is bad. I used Fuel line for my splice.

The round thing is the purge solenoid. If you dont have a code, it probably works.

The cannister replacement is your call. If it's not cracked and not filled with liquid fuel, it could be good for awhile. But it never really hurts to renew 20 year old parts if you have the hankerin to do so.

Good luck.