• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

quick ? vapor canistor.

  • Thread starter Thread starter skunk21
  • Start date Start date May 23, 2007

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
May 23, 2007
#1
  • May 23, 2007
  • #1
I'm still working some of the bugs out of my newly purchased 91. I again searched but found info mostly about people removing the system. I have fuel smell problem and found a couple of things.

the vacuum line going under the intake crumbles so I know thats gone, is this standard vacuum line, can I get it from ford or parts store what size is it?

I traced it down to a round looking motor that's plugged in and it doesn't look to healthy either. what the heck is it? and the canistor doesn't look any better. this system is 16yrs old should I replace this stuff, I looked up the canistor online and they go anywhere from $50 and up but they don't list any other parts for the system. I have a buddy who works at ford and he gets me his discount, do you guys think ford still has this stuff like that motor thing what ever the heck it is. I just want some opinions before I spend the money or is not worth messing with and just repair the vacuum hose. thanks again.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 24, 2007
#2
  • May 24, 2007
  • #2
I had to do some creative splicing on the purge line (what you are describing). At the plenum, it is likely just a short run of hose (that's actually under the plenum) that is bad. I used Fuel line for my splice.

The round thing is the purge solenoid. If you dont have a code, it probably works.

The cannister replacement is your call. If it's not cracked and not filled with liquid fuel, it could be good for awhile. But it never really hurts to renew 20 year old parts if you have the hankerin to do so.

Good luck.
 

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
May 24, 2007
#3
  • May 24, 2007
  • #3
Thanks for the help, i'll give the fuel line a try and look into the other stuff. thanks again.
 
You must log in or register to reply here.

Similar threads

B
A/C Issues
  • Boats90GT
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
213
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Mcmahst
Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
584
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
R
Engine Evap and charcoal cannister leak
  • ryan1994stang
  • Mar 14, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
667
Fox 5.0 Mustang Tech Mar 18, 2026
Mcmahst
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Drivetrain 8.8 trac lok spider gears..
  • rednotch
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
443
Fox 5.0 Mustang Tech Oct 28, 2025
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?