Rack bushing people!! I have ???s

Never Mind

I was reading the install sheet for the C/C plates and came across this:

"There is a myth that the tie rod should be kept parallel to the ground to avoid bumpsteer. NOT TRUE. What is required is that the tie rod be kept parallel to the lower control arm. As you lower your car, the tie rod end and lower control arm move together, staying parallel. If you install offset rack bushings on a stock geometry K-member, you are making the tie rod end and the lower control arm NOT parallel. You will actually CREATE bumpsteer by installing offset rack bushings on a stock K-member."

I read this and am having second thoughts about the bushings.