Roush radiator question

[SorsCode]

Who runs the Chicane Dual Bypass Radiator??? I'm thinking of getting one for my car and was just curious. Any comments on it please post up. Got pictures please post to. This will be for my Vorteched 408W.

Thanks

Danny

 

[marcus95]

Your car will run 15-20 deg. cooler with that set up properly installed as long as the rest of your cooling system is good. Joe developed it for the 99 S351's for EPA reasons. One of his finset fixes yet for making that car run so cool.

 

[SorsCode]

does it require modifications to be installed?

 

[marcus95]

Not a lot unless you are going to run a cog drive with your blower. It really goes in with few mods. The fans are really shallow.

 

[SorsCode]

What mods does it take... I'm curiuos. Trying to get this car ready to go. I'm running a 7" Crank Pulley and stock Blower Pulley for now. No cogs in future either.

 

[marcus95]

Becuase every car has something a little different going on sometimes you have to make adjustments to the shroud. Not a big deal. When you order it just tell him you talked to me (mark white S351) and want to know about any possible tricks going into a windsor.

 

[mattch2]

Not a lot unless you are going to run a cog drive with your blower. It really goes in with few mods. The fans are really shallow.

Sorry to jump in on your thread but can you have a Cog setuo on the saleen blowers at all?

 

[marcus95]

Sorry to jump in on your thread but can you have a Cog setuo on the saleen blowers at all?

No problem. It's everyones thread. We are talking pushrod windsors with centri blowers. I have never seen a cog setup for a modular but I haven't seen everything either.

 

[SorsCode]

Thanks Mark. This car is going to end up costing me an arm and a leg.

 

[DG S-351]

I'm running Joe's radiator. Some of the pics on Joe's site are of my S-351. Average temp my engine runs is 180 on street/freeway, even with the A/C. I highly recommend the radiator.

 

[marcus95]

Thanks Mark. This car is going to end up costing me an arm and a leg.

Sure. As long as your have one leg and one arm left to shift with. I'm only down to one each anyway. Just wait until you get it running. Then the real work begins.