• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Radiator

  • Thread starter Thread starter 1988WHTGT
  • Start date Start date Nov 28, 2005

1988WHTGT

Member
Mar 31, 2005
270
0
17
Guyton, GA
Nov 28, 2005
#1
  • Nov 28, 2005
  • #1
Ok, so my radiator isn't the greatest thing in the world. I wanna get a new one, but being in school makes me poor. Is there a nice or pretty decent radiator out there thats not really expensive but nice? I'm also wondering about fitment. I notice my electric fan is really close to my water pump pulley and I'm wondering if a bigger radiator is gonna cause problems with that. Thanks for any info.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Nov 28, 2005
#2
  • Nov 28, 2005
  • #2
How about a 3 core copper/brass radiator for $180 made by GDI. The Autozone P/N is 433138. I have one and the fit & performance is very good.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Nov 28, 2005
#3
  • Nov 28, 2005
  • #3
What kinda electric fan you got?

I have a 3.8L v6 taurus fan on my LX; I pulled the 3-core from the GT and put the fan on it...wouldn't clear the water pump pulley - about 1/4-1/2" too much if I remember correctly. I ended up pulling it and going to O'Reilly's for a stock replacement 2 core for $117 after taxes....car runs fine, cools fine - Keep in mind though that this is my stock longblock 90 5.0. If I would have had the money for a Griffin or something, I probably would have went that route, but the 2 core from O'Reilly's is direct fit and has provided me w/ good results for the past month or so that I've had it
 

1988WHTGT

Member
Mar 31, 2005
270
0
17
Guyton, GA
Nov 28, 2005
#4
  • Nov 28, 2005
  • #4
I have a proform fan
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Nov 28, 2005
#5
  • Nov 28, 2005
  • #5
jrichker said:
How about a 3 core copper/brass radiator for $180 made by GDI. The Autozone P/N is 433138. I have one and the fit & performance is very good.
Click to expand...

I second that.
I had one for several years, and it worked very well, even for the stoker.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Nov 28, 2005
#6
  • Nov 28, 2005
  • #6
vristang said:
I second that.
I had one for several years, and it worked very well, even for the stoker.
Click to expand...


The motion is raised! I have that same radiator sitting in my garage. It's going in over the winter. I can't wait for the lower coolant temperatures + I am going to use the Auto Trans cooler as a cheap oil cooler to help lower my oil temps.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Nov 28, 2005
#7
  • Nov 28, 2005
  • #7
srothfuss said:
The motion is raised! I have that same radiator sitting in my garage. It's going in over the winter. I can't wait for the lower coolant temperatures + I am going to use the Auto Trans cooler as a cheap oil cooler to help lower my oil temps.
Click to expand...

I am very interested in how the cooler affects the oil temps. I have been thinking about doing this for a while, but never got around to it.
My oil temps are not high enough as it is (I only get to 195F at full hot), but I would like to know if warm up time significantly decreases.
PLEASE let us know some before and after info on oil temps. I would love to hear how this works out for you.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Nov 28, 2005
#8
  • Nov 28, 2005
  • #8
vristang said:
I am very interested in how the cooler affects the oil temps...PLEASE let us know some before and after info on oil temps.
Click to expand...

I still need to purchase the Oil Filter adaptor kit. Then I can plumb the lines / hook everything up to the radiator (once I install it) and I'll be good to go! I'll also be able to install an oil temp gauge so I can get all of the readings that we need to determine the effects both ways. The only problem is that spring is a few months away. I can do some testing in my garage during the frozen months but those readings might be off because the car will be stationary.

I'll surely keep everyone updated once I have the project completed.
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
Jan 22, 2006
#9
  • Jan 22, 2006
  • #9
update?
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jan 22, 2006
#10
  • Jan 22, 2006
  • #10
On my oil cooler? I have it installed now along with my new radiator but I can't report on the temperatures until spring when the roads clear.
 
You must log in or register to reply here.

Similar threads

Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
708
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
403
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
408
The Welcome Wagon Oct 19, 2025
Clutchfork
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?