Radio Wires

89 mustang conv. Search through some threads and the wire colors don't match what my car has. My car only has dash and door speakers and the guy I got the car from decided to save 10 dollars and try to wire the radio in without using the plugs. Any help would be great
 
If you go by your local car stereo shop, they have aftermarket stereo plugs. They usually have all the oem wire colors you'll need to rewire your stereo. Better still is ordering through Crutchfield online. They have techs that you can talk to on the phone, that can help you get it wired right. I've used them, and their great. Trying to talk to a installer at your local shop, can be frustrating.


Sent from my iPhone using Tapatalk
 
does this help

mustangFoxLights-Radio_diag.gif



890.html
 

Attachments

  • 47240d1214943368-wiring-issues-1989-mustang-gt-mustangfoxlights-radio_diag.gif
    47240d1214943368-wiring-issues-1989-mustang-gt-mustangfoxlights-radio_diag.gif
    25.4 KB · Views: 2,551
Last edited:
  • Like
Reactions: RaggedGT
http://www.the12volt.com/installbay/stereodetail/890.html


1988-89 Ford Mustang Stereo Wiring

Constant 12V+ Green/Yellow
Switched 12V+ Yellow/Black
Ground Chassis
Illumination Blue/Red
Dimmer n/a
Antenna Trigger Orange/Blue
Antenna Right Front
Front Speakers 5 1/4" Doors
Left Front (+) Orange/Green
Left Front (-) Light Blue/White
Right Front (+) White/Green
Right Front (-) Green/Orange
Rear Speakers 5" x 7" Side Panels
Left Rear (+) Pink/Green
Left Rear (-) Pink/Blue
Right Rear (+) Pink/Blue
Right Rear (-) Green/Orange
 
Well their you go. You still want to buy the plastic plugs. It just makes things so much easier, and cleaner. Their real reasonable. Me I like using male and female connectors, when I wire the stereo. Shops like to crimp wires with one time connecters. Either is fine.


Sent from my iPhone using Tapatalk
 
I just went through a nightmare with the 98gt I picked up recently. One speaker was cutting out, so I decided to pull the aftermarket radio out and have a look. Speakers and wiring were all stock, except for an amp and 2 12" subs in the trunk.

I found a few problems with the plug/pigtail adaptor. Some of the speaker wires weren't staying in the plug. The pins were backing out of the back of the plug. So I went and got a new pigtail/adaptor harness and put that in. After putting that one in, there was no sound whatsoever (well, besides the subs). I figured the radio shorted out internally. Took it apart and couldn't find anything wrong, so I went ahead and picked up a new one. Still no sound. At this point, I found an old spare speaker and hooked it up directly to the new receiver and got sound. So evidently, there was a speaker wire shorting out somewhere in the car's speaker wire harness, which caused all of them to go out. I didn't want to start hacking up the factory harness, so I just bypassed it and ran all new speaker wire to the four factory speakers. Worked great, but it was a PAIN to run.

I'll eventually end up doing the same thing to my 88gt, since it has similar issues. But generally speaking, this is probably the best route, if you have problems with the factory harness, as a lot of these old cars do. You have the added bonus of using some better quality wiring, in case you want to add new speakers and amp at some point.
 
  • Like
Reactions: stangboy