raising rear end

3

351w fastback

New Member

Jul 25, 2004

91

0

0

Nov 29, 2004

#1

• Nov 29, 2004

• #1

i have a 67 fastback and i just got new mid eye springs installed but the rearend is .5-1" to low so i want to raise it that much. how can i do this? longer shackles?
thanks

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Nov 29, 2004

#2

• Nov 29, 2004

• #2

Yes, but drive it a little if you can to get the springs to settle so you know for sure how much higher you have to go.

 

3

351w fastback

New Member

Jul 25, 2004

91

0

0

Nov 29, 2004

#3

• Nov 29, 2004

• #3

the springs have veen on the car for about a month so i think theyve settled. are longer shackles ok to use? can i make my own?

 

Stang_1973

Founding Member

Jul 13, 2001

565

9

38

San Antonio, Tx.

Nov 29, 2004

#4

• Nov 29, 2004

• #4

Air Shocks?

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Nov 29, 2004

#5

• Nov 29, 2004

• #5

Yes you could make your own, but if they get a little on the long side they could add to oversteer (which could be a benefit in these nose heavy cars) or depending on your year they may contact the rear apron at full spring compression.

 

6Stang7

New Member

Jun 1, 2003

1,470

0

0

Livermore, CA

Nov 29, 2004

#6

• Nov 29, 2004

• #6

Shackles are the only way I would recommend to raise the rear. I did it with air shocks and it works, but the ride sucked.

 

3

3spd on floor

Founding Member

Aug 13, 2002

1,099

0

0

Acworth, GA

Nov 29, 2004

#7

• Nov 29, 2004

• #7

not to be a jerk, but you could go with the right springs for that ride height. mid eyes are designed to lower the car about .5-1 inch, so the regulars would get you back to where you want to be.

where are you located? i've got some fairly new standard springs that i might trade for some mid eyes if you're close.

 

HistoricMustang

Active Member

Apr 11, 2003

2,359

0

46

Confederate States of America

Nov 29, 2004

#8

• Nov 29, 2004

• #8

Cut the front coil springs. Start by cutting 1/4 turn at a time.

HistoricMustang
www.historicmustang.com

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Nov 29, 2004

#9

• Nov 29, 2004

• #9

HistoricMustang said:

Cut the front coil springs. Start by cutting 1/4 turn at a time.

HistoricMustang
www.historicmustang.com

Click to expand...

You forgot to tell him to shelby drop the thing and granada-ize the front end.
That's what I'm doing after seeing my neighbor install $2K worth of disk brakes into a '67 fastback and then seeing your site.

 

HistoricMustang

Active Member

Apr 11, 2003

2,359

0

46

Confederate States of America

Nov 29, 2004

#10

• Nov 29, 2004

• #10

"krash", you got it buddy. Pass the word - "You do not, repeat, do not have to spend a ton of money on the front end of these things to make them perform". Always remember the "Magic of Rear Steer" as layed out at HistoricMustang.com .

Heck, we out ran Vic Edelbrock and his two daughters, plus the Shelby American Automobile Club (SAAC) flagship machine all in the same race the "Day the Earth Stood Still" down at Daytona. Our low budget racer came in on an open trailer, they had numerous closed trailers with tons of money invested and they thumbed their nose at us until the green flag fell. From Florida it must have been a long ride back to California for the Eldelbrock clan and hate to even think about the SAAC group having to drive back to the Northeast. I understand the SAAC R-model has since been sold - no wonder!

http://www.historicmustang.com/daytona.html

Talk about a party in Daytona!

HistoricMustang
www.historicmustang.com

 

2nd Mustang

Founding Member

Feb 24, 2002

2,488

0

46

Southern California

Nov 29, 2004

#11

• Nov 29, 2004

• #11

Personally I wouldn't use long shackles as they tend to make the spring sag after awhile. I have even seen some leaf springs bend the wrong way after using long shackles. I've tried air shock too, yes the ride is harsh.