• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Random bucking?

  • Thread starter Thread starter stangzroastrice
  • Start date Start date Jan 9, 2006

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jan 9, 2006
#1
  • Jan 9, 2006
  • #1
Hey guys, I was bored going to office max the other day so while on the highway I hit 125mph or so in my 89 bone stock notchback. It has 157k miles on it and I do this all the time... Well, randomly today, after slowing down it started to buck and made me think it was a transmission problem. After examining I realized that the car only bucks when its under 2k RPMs, but when I give it a decent amount of gas it runs perfectly decent. The idle seems to be a little eractic now as well when it was perfect. I also noticed that I have a ticking coming from the driver's side muffler, which led me to think that I have an exhaust leak... Considering the car sounds exactly the same except for the ticking from the muffler at idle, would such a small exhaust leak cause such a bucking? thanks guys
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jan 10, 2006
#2
  • Jan 10, 2006
  • #2
ttt
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 10, 2006
#3
  • Jan 10, 2006
  • #3
Depends how low inder 2k it is, obviously if ur trying to cruise along at like 1300 rpm its gonna buck like crazy. Like how most stick cars do in a parking lot in 1st gear. With my car i cant cruise anywhere under 1900 at the minumum in 5th gear. I just think under 2k is to low to be cruising under load (in a high gear), i could see on the long flat level surface at a steady pace. I didnt see but sounds like u have a 5spd.? how fast were u going when it was bucking? Someone on how had a real bad bucking problem and it was his maf sensor.
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jan 10, 2006
#4
  • Jan 10, 2006
  • #4
oh my bad... thought i specified... its an AOD with the stock 2.73 gears
yeah I mean there was a very small buck when it would be at 1500rpms or so cruising at 35mph but that was only when i gave it more gas for the transmission to downshift... other than that, it was completely fine but now it seems to have a very noticeable buck from around 2000 rpm's and down... when i give it a good amount of gas... works fine. if im doing around 65mph it has a slight buck just over 2000 rpms now. doing 85mph, perfectly fine.
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jan 10, 2006
#5
  • Jan 10, 2006
  • #5
ttt
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jan 10, 2006
#6
  • Jan 10, 2006
  • #6
by the way, hot or cold, the car still does this the same way and it doesn't seem like i've lost much power either?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 10, 2006
#7
  • Jan 10, 2006
  • #7
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 
You must log in or register to reply here.

Similar threads

Paint and Body Rotten moon roof trim
  • Teen'93stang5.0
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
231
Fox 5.0 Mustang Tech Apr 15, 2026
Teen'93stang5.0
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
616
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
442
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
B
More Issues With New Edge
  • Blackout67
  • May 3, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
22
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- May 11, 2025
Blackout67
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?