Random bucking?

Hey guys, I was bored going to office max the other day so while on the highway I hit 125mph or so in my 89 bone stock notchback. It has 157k miles on it and I do this all the time... Well, randomly today, after slowing down it started to buck and made me think it was a transmission problem. After examining I realized that the car only bucks when its under 2k RPMs, but when I give it a decent amount of gas it runs perfectly decent. The idle seems to be a little eractic now as well when it was perfect. I also noticed that I have a ticking coming from the driver's side muffler, which led me to think that I have an exhaust leak... Considering the car sounds exactly the same except for the ticking from the muffler at idle, would such a small exhaust leak cause such a bucking? thanks guys
 
Depends how low inder 2k it is, obviously if ur trying to cruise along at like 1300 rpm its gonna buck like crazy. Like how most stick cars do in a parking lot in 1st gear. With my car i cant cruise anywhere under 1900 at the minumum in 5th gear. I just think under 2k is to low to be cruising under load (in a high gear), i could see on the long flat level surface at a steady pace. I didnt see but sounds like u have a 5spd.? how fast were u going when it was bucking? Someone on how had a real bad bucking problem and it was his maf sensor.
 
oh my bad... thought i specified... its an AOD with the stock 2.73 gears
yeah I mean there was a very small buck when it would be at 1500rpms or so cruising at 35mph but that was only when i gave it more gas for the transmission to downshift... other than that, it was completely fine but now it seems to have a very noticeable buck from around 2000 rpm's and down... when i give it a good amount of gas... works fine. if im doing around 65mph it has a slight buck just over 2000 rpms now. doing 85mph, perfectly fine.
 
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.