Re-wiring help

89Notch · Dec 22, 2003

Well, i'm putting all my wires into the fender and moving the selenoid to the passenger side. I just have one question. I looked at t-moss' wiring diagram and i seem to have another wire that goes into the battery side of the selenoid. It is on a black/white wire and has like a small metal box type deal on the end of it. I don't know what it is and was just wondering if any of you knew. I took a picture of it but for some reason it won't let me upload it and i dont know why. Thanks for the help

perkys stang · Dec 22, 2003

send me the pic I will upload it for you.... Click here

86Cobra · Dec 22, 2003

That's the power wire for your windows and locks.

perkys stang · Dec 22, 2003

86Cobra said:
That's the power wire for your windows and locks.

good to know..

86Cobra · Dec 22, 2003

perkys stang said:
good to know..

I found out the hard way.

perkys stang · Dec 22, 2003

hehehe...

Well since I have NO power I will be more then happy to remove that extra wire i am about to take on the task of redoing ALL my wiring since I am converting to the EPEC I beleive I can get the 60pin harness down to 20-22 pins.. SWEET!!! Just hope it starts come MARCH

lxsteed · Dec 22, 2003

Did anyone have to extend the O2 (I think those are the wires) on the passenger side? My car's on stands now, and Thats where I'm at. I've got the entire harness in the fender, and that seems to be the last one I need to connect, but I think its going to be short.

89Notch · Dec 22, 2003

I have a carb so I don't have an oxygen sensor. Thanks for the info 86. My buddy said the thing on the end of it is a power distribution block i guess. I think im just going to get rid of that and use an O- thing to hook it onto the selenoid. thanks! have fun rewiring all that perky, it sure is fun

86Cobra · Dec 22, 2003

89Notch said:
I have a carb so I don't have an oxygen sensor. Thanks for the info 86. My buddy said the thing on the end of it is a power distribution block i guess. I think im just going to get rid of that and use an O- thing to hook it onto the selenoid. thanks! have fun rewiring all that perky, it sure is fun

The thing on the end is the circuit breaker. Don't get rid of it unless you put another one inline.

perkys stang · Dec 22, 2003

lxsteed said:
Did anyone have to extend the O2 (I think those are the wires) on the passenger side? My car's on stands now, and Thats where I'm at. I've got the entire harness in the fender, and that seems to be the last one I need to connect, but I think its going to be short.

I ran mine done the pass side fenderwell to the frame came out and over the top of the trans.. prefect fit even with longtubes.. I put it in the fender where the a/c canister used to be...

89Notch · Dec 22, 2003

i sent perky the picture of the thing i'm talking about so can you let me know if that is the circuit breaker or not? thanks

89LXNotch · Dec 22, 2003

When I did the conversion to V8 on my convertible, I ran all the wiring (driver & passenger side) in the fenders. The only thing I needed to lengthen was the mass-air meter wiring.

perkys stang · Dec 22, 2003

here is his pic

86Cobra · Dec 23, 2003

Yep, that's the circuit breaker for the power windows and locks.

perkys stang · Dec 23, 2003

86Cobra said:
Yep, that's the circuit breaker for the power windows and locks.

Mavrick · Dec 23, 2003

86Cobra said:
Yep, that's the circuit breaker for the power windows and locks.

Is this the piece that connects to the starter selenoid? I also have this... my car has NO power options, can i just hack it off or what?

86Cobra · Dec 23, 2003

Mavrick said:
Is this the piece that connects to the starter selenoid? I also have this... my car has NO power options, can i just hack it off or what?

Hmmm, I would unhook it and see if anything stops working before you hack it off. Just to be sure. You never know with Ford. On power option cars it's for the locks and windows but on non-power option cars Ford may have hooked it to the freakin' dash lights.

86Cobra · Dec 23, 2003

perkys stang said:

Every once in a while I get to be right.

Mavrick · Dec 23, 2003

86Cobra.. Your right.. sometimes you never know with Ford. I'll have to look into that.

It's always nice to get rid of stuff around the car that you don't need.. tidies things up.

Re-wiring help

89Notch

perkys stang

New Member

86Cobra

perkys stang

New Member

86Cobra

perkys stang

New Member

lxsteed

89Notch

86Cobra

perkys stang

New Member

89Notch

89LXNotch

perkys stang

New Member

Attachments

86Cobra

perkys stang

New Member

Mavrick

86Cobra

86Cobra

Mavrick

Similar threads

Re-wiring help

New Member

New Member

New Member

New Member

New Member

Attachments

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency