Well, i'm putting all my wires into the fender and moving the selenoid to the passenger side. I just have one question. I looked at t-moss' wiring diagram and i seem to have another wire that goes into the battery side of the selenoid. It is on a black/white wire and has like a small metal box type deal on the end of it. I don't know what it is and was just wondering if any of you knew. I took a picture of it but for some reason it won't let me upload it and i dont know why. Thanks for the help
Re-wiring help
- Thread starter 89Notch
- Start date
perkys stang
New Member
86Cobra
Founding Member
perkys stang
New Member
86Cobra
Founding Member
perkys stang
New Member
hehehe...
Well since I have NO power I will be more then happy to remove that extra wire
i am about to take on the task of redoing ALL my wiring since I am converting to the EPEC I beleive I can get the 60pin harness down to 20-22 pins.. SWEET!!! Just hope it starts come MARCH
Well since I have NO power I will be more then happy to remove that extra wire
i am about to take on the task of redoing ALL my wiring since I am converting to the EPEC I beleive I can get the 60pin harness down to 20-22 pins.. SWEET!!! Just hope it starts come MARCH
Did anyone have to extend the O2 (I think those are the wires) on the passenger side? My car's on stands now, and Thats where I'm at. I've got the entire harness in the fender, and that seems to be the last one I need to connect, but I think its going to be short.
I have a carb so I don't have an oxygen sensor. Thanks for the info 86. My buddy said the thing on the end of it is a power distribution block i guess. I think im just going to get rid of that and use an O- thing to hook it onto the selenoid. thanks! have fun rewiring all that perky, it sure is fun
86Cobra
Founding Member
89Notch said:I have a carb so I don't have an oxygen sensor. Thanks for the info 86. My buddy said the thing on the end of it is a power distribution block i guess. I think im just going to get rid of that and use an O- thing to hook it onto the selenoid. thanks! have fun rewiring all that perky, it sure is fun
The thing on the end is the circuit breaker. Don't get rid of it unless you put another one inline.
perkys stang
New Member
lxsteed said:
I ran mine done the pass side fenderwell to the frame came out and over the top of the trans.. prefect fit even with longtubes.. I put it in the fender where the a/c canister used to be...
89LXNotch
Founding Member
When I did the conversion to V8 on my convertible, I ran all the wiring (driver & passenger side) in the fenders. The only thing I needed to lengthen was the mass-air meter wiring.
perkys stang
New Member
![whatisthis[1].webp](https://cdn.stangnet.com/data/attachments/0/535-2e08f369c8dc16d2a57c112557e06bfa.jpg?hash=kkwHrJyqa2)
86Cobra
Founding Member
perkys stang
New Member
Mavrick
Founding Member
86Cobra said:
Is this the piece that connects to the starter selenoid? I also have this... my car has NO power options, can i just hack it off or what?
86Cobra
Founding Member
Mavrick said:
Hmmm, I would unhook it and see if anything stops working before you hack it off. Just to be sure. You never know with Ford. On power option cars it's for the locks and windows but on non-power option cars Ford may have hooked it to the freakin' dash lights.
86Cobra
Founding Member
Mavrick
Founding Member
86Cobra.. Your right.. sometimes you never know with Ford. I'll have to look into that.
It's always nice to get rid of stuff around the car that you don't need.. tidies things up.
It's always nice to get rid of stuff around the car that you don't need.. tidies things up.
Similar threads
