really quick questions

[94_5.0]

I need to find out what S/T brace will fit on my set up. Which one will clear the T/F street heat intake. Also with the install of the E303 cam the engine idle is very nasty It will die on me after sitting at a light for like 3 seconds I readusted my idle to 900 and it still does it esspecially when I have any accessorys on, will a Tweeker R/T fix that problem or am I going about this all wrong. Any help would be greatly apprecated thanks in advance.

 

[Joes95GT]

Yes, the TwEECer will fix the idle problems once you learn how to use it. I'm under the impression that almost every single STB clears aftermarket intake manifolds. I know MAC and Steeda make ones that clear, and I'm sure there are more.

Joe

 

[94_5.0]

Great thanks joe, that is a big help

 

[jmuva44]

I've heard that the STB doesnt really do much unless you take really tight turns or have ungodly HP/TQ. I took mine off and cant tell the difference. Plus I lost about 10lbs.

 

[94_5.0]

will a tweeker R/T be able to change my spedo calabrations so that I will have the correct speed ssttings?

 

[jmuva44]

no, it will not. on 96+ cars it can.

 

[slvrbullit302]

To cure my idle issues with the F-cam I have installed I used a 93 IAC motor. It is a tight fit since it is longer but only $50 versus $300+ for the twEECer. Just trying to give a little info. Also I have no chip or anything like that still running the stock crappy 95 computer.