Rear Brakes

nonlocality · Feb 6, 2004

are the factory rear brakes for a 94 gt, the same as the 94 cobras rear brakes?

nonlocality · Feb 6, 2004

Mrgreen94gt · Feb 6, 2004

No. Cobras have a 11.65" rotor and a different caliper.

Killercanary · Feb 6, 2004

Are you sure Mrgreen94gt??? I'm 99% positive that the cobra have the same caliper, but they have a different caliper bracket, moan bracket (I don't even know what that is though), and a larger rotor.

Check out this link...
http://sn95brakes.cjb.net/

DavidF · Feb 6, 2004

The Cobra's are vented where the GT's are solid.

Mrgreen94gt · Feb 6, 2004

Killercanary said:
Are you sure Mrgreen94gt??? I'm 99% positive that the cobra have the same caliper, but they have a different caliper bracket, moan bracket (I don't even know what that is though), and a larger rotor.

Check out this link...
http://sn95brakes.cjb.net/

Oh yeah. I forgot that the calipers are the same, just with different hardware surrounding them.

nonlocality · Feb 7, 2004

sweet thanxs for the help. now what about the rear brake pads for the cobra could i use those on my gt? reason i ask is cus my friend has a 94 cobra pace car and he just gave me a set of new rear brake pads. he had bought em and then his pops got him some performance ones so he gave the other ones to me. will they fit my car?

RyClef331 · Feb 8, 2004

yes...the only difference is what was said above....the cobras are vented making them slightly thicker but the calipers and pads are the same. throw em on there. I researched this alot before. got different answers everywhere. finally I met a guy with a cobra and We yanked wheels side by side and inspected....same stuff

Killercanary · Feb 8, 2004

Pads are not the same, they are thinner to accomodate the vented rotor, I don't think you can use them. Just go to an autoparts store and have them look it up to know for sure.

sldghmr · Feb 8, 2004

Wouldn't he be able to fit a "thinner" pad versus a "thicker" pad? If his stock rotor is thinner than the Cobra rotor, the Cobra pad should go on easily. No?

Killercanary · Feb 8, 2004

As long as the caliper has enough travel to take up the slack... maybe.

sldghmr · Feb 8, 2004

True. So if I were to get some Cobra brackets and rotors and some thinner Cobra pads, I'd have a Cobra rear brake set-up? Will this fit under my stock 16's? Would I still be able to use my 15" Drag Radials? Please say yes!!!

Killercanary · Feb 8, 2004

Sorry, I don't knwo the answer to whether or not it will clear your wheels, but yes, that is all you need to do. Check out the link I provided above, there is a TON of info there.

sldghmr · Feb 8, 2004

Killercanary said:
Sorry, I don't knwo the answer to whether or not it will clear your wheels, but yes, that is all you need to do. Check out the link I provided above, there is a TON of info there.

Checked out that link....thanks, good info there. Didn't quite answer the question on the 15" rims, so I guess I'll have to do a little more diggin. thanks again.

RyClef331 · Feb 9, 2004

sldghmr...to answer your question...yes to all. You can still fit a 15 incher in there. I've ran 15" v-6 wheels on my 94gt and the the brakes are the same between a cobra and a GT. its the fronts that have clearance problems on a cobra....which is why they come with a 17" space saver spare and not the 16 the gt's get. Do the rotor and pad swap and you got a cobra rear brake set up!

go-stang5.0 · Feb 9, 2004

The rear brakes are not the same on a gt and cobra! GT's have 10in. rotors (solid) cobras have 11.65in (vented rotors). 16's may clear them but good luch getting the 15's on that stuff.

sldghmr · Feb 9, 2004

Okay guys........I'm still getting that up and down feeling here about the 15"er's. What's the final word? Do I sell my barely used 275/60/15 mounted & balanced Drag radials (for a reasonable fee of course) and parlay that into some 16's or 17's? Do they make a 17" Drag radial? and why don't the caps work on the r key? Hmmmm....

nonlocality · Feb 9, 2004

thanks for all the feedback guys. i finished my rear brakes today and decided to say what the hell and bought some cobra rotors to go with my pads. well everything went in with plenty of clearance and i have the stock 16 inchers. as far as for the clearance on the 15" drags, you might be able to get em on there not to sure though. i looked at my wheels and it seems like there'll be room for another half inch on each side, its worth a shot

Killercanary · Feb 9, 2004

Did you put the cobra brackets and such on, or just throw on the cobra rotors??? Sorry if this sounds dumb, but I wasn't sure what you meant.

nonlocality · Feb 9, 2004

nope, all i did was put the cobra rotors and pads on. i used my regular gt calipers as well. hope this kinda clears it up

Rear Brakes

nonlocality

nonlocality

Mrgreen94gt

SIMMA DA NA!!!

Killercanary

The car that set the bar.

DavidF

New Member

Mrgreen94gt

SIMMA DA NA!!!

nonlocality

RyClef331

New Member

Killercanary

The car that set the bar.

sldghmr

Member

Killercanary

The car that set the bar.

sldghmr

Member

Killercanary

The car that set the bar.

sldghmr

Member

RyClef331

New Member

go-stang5.0

New Member

sldghmr

Member

nonlocality

Killercanary

The car that set the bar.

nonlocality

Similar threads

Rear Brakes

SIMMA DA NA!!!

The car that set the bar.

New Member

SIMMA DA NA!!!

New Member

The car that set the bar.

Member

The car that set the bar.

Member

The car that set the bar.

Member

New Member

New Member

Member

The car that set the bar.

Similar threads

Privacy & Transparency

Privacy & Transparency