• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rear dics brakes

  • Thread starter Thread starter auto4x4
  • Start date Start date Dec 11, 2008
A

auto4x4

New Member
Dec 11, 2008
11
0
0
Dec 11, 2008
#1
  • Dec 11, 2008
  • #1
i have a 86 gt w/rear disc 4-lug. both calipers are right side. can ranger axles work. ihave a 8.8 w/3.55. would like 5-lug w/same set up for now. axles are 28 splines. this the way i bought the car. can the rotors from 94@newr work w/ said calipers. i know u want calipers name. not for sure/ many makes use same rear calipers. if the face of a 4-lug axle is the same would 5-lug work. meaning stud placement from 4 to 5. 4 lug same as 5 lug. remenber v6 smaller rotors in rear. any help would be helpfull.
 

FrankenStang

Now, give me a damn CT!
15 Year Member
Apr 16, 2005
4,461
70
129
Florence, Az
Dec 11, 2008
#2
  • Dec 11, 2008
  • #2
Ouch. Your post makes my head hurt.

Moved to Tech.
 

Chrome_Rust

Member
Dec 5, 2008
530
1
17
Findlay, Ohio
Dec 12, 2008
#3
  • Dec 12, 2008
  • #3
on my 93 coupe i used a tbird rearend, swapped in ranger axles, and used backing plates, mounts, calipers, and rotors from a 1998 Merc. Grand Marquis. they are solid discs, but work great in a 3100lb car. and you can get the parts cheap out of a Yard. i have less than 100 bucks in EVERYTHING.

Charlie
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Dec 12, 2008
#4
  • Dec 12, 2008
  • #4
Wow, i'd like to help, but i just don't understand what you are asking here.

You want 5-lug rear disks brakes?? But you want to use ranger axles?

everything else confused me...and GT and V6's use the same size rear disk brakes.

If you have a t-bird setup, it's not really compatible with SN95 parts unless you do modifications
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Dec 12, 2008
#5
  • Dec 12, 2008
  • #5
My guess is that since you have 4 lug rear disc, that it is the Turbocoupe/ 93 Cobra setup or the Ford Motorsports/SSBC disc conversion. You need to take some pics of the calipers and the brackets that mount to the axle housing for us to say for sure.

If you have either of these you can use the 5 lug Ranger axles, but it will require modifications of either the mounting bracket (or special custom brackets) or redrilling the rotors to 5 lugs. I think discbrakesrus has 5 lug rotors for this application too.

Since you don't know what conversion you have, take some pics and then we can really help.
 

old_blue

15 Year Member
Nov 3, 2003
1,783
282
124
Dec 12, 2008
#6
  • Dec 12, 2008
  • #6
I have read this 5 times and dont understand but here goes, as mentioned above, you cant really use a 4 lug disc setup with a 5 lug. there are modifications to the brackets or discs that IMO arent worth your time. from what I know a 94+ caliper will not work with those brackets and I believe the lines are different as well.
 

the pony boy

Founding Member
Apr 19, 2002
358
0
16
10512
Dec 13, 2008
#7
  • Dec 13, 2008
  • #7
if its a cobra/tbird rear set up disc brakesrus has the rotors for you all you need is the the correct length axles.if its a stock fox rear than the ranger axles work but im not sure if its a complete t-bird rear if the stock length axles will work.im sure someone has that info.
 

Chrome_Rust

Member
Dec 5, 2008
530
1
17
Findlay, Ohio
Dec 13, 2008
#8
  • Dec 13, 2008
  • #8
Like i said before.
I HAVE a Tbird 8.8 In my car. the Length is the same as a regular Foxbody 8.8. the only thing is that the disc brake rear has longer axles, because of the vented discs. Ranger or aerostar axles fit fine with no mods. now, with the Panther Platform (Crown Vic, Grand Marq, Lincolc TC), you can unbolt everthing from the axle ends out and bolt them to a foxbody 8.8. the Discs are solid, but has a intergrated drum brake that sits inside the rear rotor. it all bolts on, and works great... here is some info.

From CoolCats.net
The 1987-88 Turbo Coupes had their own unique 8.8" axle equipped with rear disc brakes. The width of the axle housing itself was identical to the Cougar 8.8" with drums. All TC 8.8" rears had Quad shocks and Traction-Lok. Cars with 5-speed transmissions had a 3.55 gear; automatics had the 3.73 ratio (a clue while searching for on in salvage yards is that all 1987-88 5-speed Turbo Coupes had dual exhaust, whereas the automatics had single exhaust). All TC's had standard ABS brakes which necessitated several sensors to be installed on the rear end, along with an exciter ring on each rear axle shaft, thus making the rear axles wider. Installing a Turbo Coupe rear as-is requires conversion to rear disc brakes and modifications to the existing brake system. However, all ABS-related hardware will not work. It is possible to convert this axle to drum brakes using other Ford drums and hardware. Since there were quite a few TC's made, the TC rear is plentiful in supply but usually costs a bit more due to the rear discs. If you cannot find a stock 8.8" Cougar rear end with drum brakes, then making one out of a Turbo Coupe rear is indeed a viable alternative.
Click to expand...

Here is some more info. Hope it helps. COOL CATS :: Tech Center: Advanced:

Charlie
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 13, 2008
#9
  • Dec 13, 2008
  • #9
Five lug Turbo Coupe conversion:
Use the 94-95 axles Mustang axles.
Use 1990 Mazada MPV 3.0 V6 front rotors (10", 5 lug x 4.5" pattern, 2 7/16" offset ).
While you are at the auto parts store, set a TC rear rotor side by side with the Mazada rotor and they are the same except for the offset.

The next step fixes the offset problem:
Use a Maximum MotorSports 1/8 spacer (MMWS6, Maximum Motorsports :: The Leader In Mustang Performance Suspension ) between the inside of the rotor and the axle flange.
The spacers may need to have the OD machined to fit properly. The stock rotor offset is 2 5/16" and the Mazada rotors are 2 7/16" offset.
The 1/8" spacer puts the rotor back dead center alignment with the calipers.
 
A

auto4x4

New Member
Dec 11, 2008
11
0
0
Dec 24, 2008
#10
  • Dec 24, 2008
  • #10
sorry, wanting to know if i can keep the right side calipers for now. meaning 5-lug axles @ rotors. looked through the wheels @ the calipers seem to look like sho/sable. i know you want pics. will try to get some soon.
 
You must log in or register to reply here.

Similar threads

8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
629
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
C
Fox Need help identifying brake setup
  • Cypher02xd
  • Apr 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
206
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
Mustang5L5
G
Auto City Classics 67-70 Mustang disc brake kit question/s
  • GOvert
  • Jun 30, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
183
1965 - 1973 Classic Mustangs -General/Talk- Jun 30, 2026
GOvert
G
Which SN95 axles for 93 LX, disc brakes, ABS rings?
  • dan50
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
595
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 3, 2026
7-UP BILL
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
320
Suspension Jul 23, 2026
JasonB66
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?