rear end build up ?

Tony01GT

New Member

Dec 16, 2002

487

0

0

Orland Park, IL

Jul 10, 2004

#1

• Jul 10, 2004

• #1

I'm looking into buying the new auburn diff. with the flip of a switch goes from limited slip to full locker. I want that and 31 spline mosar axles. What do I need for all that? Do I need new gears and driveshaft? If so i have FRPP 3.73's, 4.10's and aluminum driveshaft that are unopened and unused for sale. How well will that stuff work, gains, etc.?

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Jul 10, 2004

#2

• Jul 10, 2004

• #2

go with an eaton its fully forged and is rebuildable. expect anywhere from .5-.3 seconds depending on how much traction you can keep and how high you will launch

 

Tony01GT

New Member

Dec 16, 2002

487

0

0

Orland Park, IL

Jul 10, 2004

#3

• Jul 10, 2004

• #3

Modular2v said:

go with an eaton its fully forged and is rebuildable. expect anywhere from .5-.3 seconds depending on how much traction you can keep and how high you will launch

Click to expand...

Is it limited slip or locker? And do I need new gears or can I use the ones I got? same for the DS

 

Tony01GT

New Member

Dec 16, 2002

487

0

0

Orland Park, IL

Jul 10, 2004

#4

• Jul 10, 2004

• #4

Any help would be appreciated, I dont know if i need c clip eliminators or if they come withthe axles? I'm kinda going into this blindly so I will rely on you guys for info. I dont know if the 31 spline axles and diff, will make me need to new gears & ds?

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Jul 10, 2004

#5

• Jul 10, 2004

• #5

just get a 31 spline eaton and moser 31 spline C-clip axels and you will be set...you can use ur old gears if you want but i would go with 4.10s and you can use you old driveshaft too

 

Tony01GT

New Member

Dec 16, 2002

487

0

0

Orland Park, IL

Jul 10, 2004

#6

• Jul 10, 2004

• #6

Modular2v said:

just get a 31 spline eaton and moser 31 spline C-clip axels and you will be set...you can use ur old gears if you want but i would go with 4.10s and you can use you old driveshaft too

Click to expand...

thanks!! Now I just have to sell these 3.73's, any takers, say $100 obo(unused)

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Jul 10, 2004

#7

• Jul 10, 2004

• #7

so tony you have decided to go with 4.10s? GOOD CHOICE!!! what mods do you have?