rear end gear ?
- Thread starter edddd
- Start date
Look at the axle cover in the middle of the rear axle...that will tell you what you're working with...also, and i'm unsure about this, but you might be able to check the door jam sticker for that info...
that being said, it's likely a 3.23 gear ratio (maybe even a 3.53)...however if you're planning on doing any upgrading to the gears go with the FRPP4.10s; they're a sure thing
....whatever you do, don't go with anything lower, you will most likely not be pleased with anything less..fire it up
that being said, it's likely a 3.23 gear ratio (maybe even a 3.53)...however if you're planning on doing any upgrading to the gears go with the FRPP4.10s; they're a sure thing
....whatever you do, don't go with anything lower, you will most likely not be pleased with anything less..fire it up
NastyStang113
New Member
NotQuik
Founding Member
i think 05-06 had standard 3.55's then 07 3.31's were optional while 3.55's were standard? somebody correct me if i'm wrong.
NastyStang113
New Member
Correct. 2008s without a doubt came standard with 3.31s. I made sure that my car had 3.55s from the factory when I bought my car.
NotQuik
Founding Member
Five Oh Brian
Member
'05-'09 GT automatic all came with 3.31 gears. No exceptions.
'05-'06 GT manuals all came with 3.55 gears. No exceptions.
Starting in '07, GT manuals came standard with 3.31's, with 3.55's optional.
The axle code is on the driver's side door jamb and on the differential tag.
'05-'06 GT manuals all came with 3.55 gears. No exceptions.
Starting in '07, GT manuals came standard with 3.31's, with 3.55's optional.
The axle code is on the driver's side door jamb and on the differential tag.
NastyStang113
New Member
Similar threads
