• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rear gear whine please help

  • Thread starter Thread starter noslow86
  • Start date Start date Apr 3, 2005
N

noslow86

New Member
Dec 30, 2003
68
0
0
sandwich il
Apr 3, 2005
#1
  • Apr 3, 2005
  • #1
had a guy install my 373 gear after a year my buddy told me the whine got worse. i cant hear it that bad because i got dump exhaust . will this whine hurt me or cause damage if not i will still drive it but if it brakes something i screwed. tight on money. its a ford motor sport gear i watch him install it with the making compound and it looked good and saw him shem it what should i do drive it and deal with it or what till it brakes. the guy said he would look at it but who knows when that will be
 
S

SaleenKid351

New Member
Apr 4, 2005
2
0
0
Apr 5, 2005
#2
  • Apr 5, 2005
  • #2
I put 4.10 gears in my friends 97 gt and they whined for about 2 wks. Also another friend had his gears installed by someone down town and when they were done they forgot to put in fluid to the rear end and just completely ate everything up. Check your fluid level and wear pattern on the gears. They shouldn't really whine past a month though after they get broke in. Also let the gears brake in and dont go out and just stab the gas after they're in. Could cause problems.
 

302GT

New Member
Mar 30, 2005
81
0
0
Carson City,Nv.
Apr 5, 2005
#3
  • Apr 5, 2005
  • #3
I had my 3.73's put in by a shop that does gears and custom car work and he said that 3.73's will make noise and that would stay.Mine whine a little but it's not a big deal.I hope it won't hurt anything.
 
E

erics91stang

New Member
Apr 5, 2005
7
0
0
jax, fl
Apr 5, 2005
#4
  • Apr 5, 2005
  • #4
if the pinion bearing is not bad and the pinnion was shimmed and set up correctly it shouldn't whine at all.......
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
338
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
801
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Monday at 10:08 AM
squeak93
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
469
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?