Fighting a leak from bellhousing. I had a leaking main years ago on another motor, but can't recall specifics.
Oil is currently dripping from the area between the bellhousing and the backing plate. None on the backside of the backing plate, and appears as if there is an oil film inside the bellhousing.
I used loctitie on flywheel bolts. I assume this is the rear main seal, but I am baffled as to why oil is only in the bellhousing.
Is this typical of a rear main leak? No oil on backside of the motor btw.
Joe
Oil is currently dripping from the area between the bellhousing and the backing plate. None on the backside of the backing plate, and appears as if there is an oil film inside the bellhousing.
I used loctitie on flywheel bolts. I assume this is the rear main seal, but I am baffled as to why oil is only in the bellhousing.
Is this typical of a rear main leak? No oil on backside of the motor btw.
Joe