• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rear shock swap help

  • Thread starter Thread starter luckythirteen13
  • Start date Start date Feb 2, 2006
L

luckythirteen13

New Member
Jul 19, 2005
648
0
0
Anaheim, CA
Feb 2, 2006
#1
  • Feb 2, 2006
  • #1
i just got my new strange 10 way adjustable shocks for the rear and i went out to see if i could pull off the ones that are on there. when i tried to loosen the bolt, the upper part of the shock just spins with it. i tried to hold it and have someone else loosen the bolt but i cant get a grip on the upper part of the shock. what is the best way to do this? also, is there a torque setting for the upper or lower bolts?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Feb 2, 2006
#2
  • Feb 2, 2006
  • #2
maybe a cloth/nylon oil filter wrench could sinch tight enough to get a grip on top of shock? don't forget to use some liquid wrench to help lossen the rust. if you can get a oxy/acetelene torch on it you could burn the nut off. maybe a small grinder with a zip cut blade on it would also work. you mayhave to take some interior panels off.
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Feb 2, 2006
#3
  • Feb 2, 2006
  • #3
Your having problems with the upper nut?

Snap on makes sockets that fit the top of the shock. Before I got those I used vice grips.
 

93 teal terror

Founding Member
Jul 13, 2001
971
62
69
Durham N.C.
Feb 2, 2006
#4
  • Feb 2, 2006
  • #4
I used a pair of small open face wrenches on the top to hold it....I dont remember the sizes though
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Feb 2, 2006
#5
  • Feb 2, 2006
  • #5
air ratchet or impact will zip that nut right off. then a couple of dut, dut, duts and the new shock is tightened.
 
L

luckythirteen13

New Member
Jul 19, 2005
648
0
0
Anaheim, CA
Feb 2, 2006
#6
  • Feb 2, 2006
  • #6
Jerry nailed it. i have no idea why i didnt think of that. i went out just now, filled the compressor and it took those nuts off its too dark to work on it now and without the relay for my electric fan i ordered today i have no car anyways so ill finish the shocks tomorrow after work. thanks guys
 
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
C
Suspension Rear suspension help
  • Clark302
  • Aug 17, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
458
Fox 5.0 Mustang Tech Aug 17, 2025
Clark302
C
M
Bent Rear Spring Perches
  • Miozu
  • Aug 18, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
520
SN95 4.6L Mustang Tech Sep 8, 2025
PSKSAM2
P
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
349
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?