Rear Upper control arms?

[DemonGT]

iv had the Pro3i weight jacker lower arms for some time now but still have the stock uppers...i get bad wheel hop if i spin the tires....not sure if new uppers will help or not but i figure they need replacing anyway...but is there a certain kind i should go with? was looking at the matching pro3i uppers but they seem pretty spendy?

 

[Brads Coupe]

I just purchased a set of these. Very affordable.

 

[06stangtyme]

I feel the best sollution to get rid of wheel hop is to
replace the rear shocks, The stock shocks are weak IMO.

 

[DemonGT]

those control arms look really nice..but i was steering away from the adjustable ones ...cause im a idiot and have/wouldnt have any idea how to set them..just wanted some to bolt in and go...

also..the rear shocks arnt stock there the lakewood 50/50's, only a couple hundred miles on them

 

[1991GreeNLX]

jut buy SVO upper control arms they are like $85.00 shipped

 

[Shakerhood]

Make sure your Quad Shocks are in place too!

 

[Cougar5.O]

Make sure your Quad Shocks are in place too!

My thought exactly.

 

[DemonGT]

i removed the quads to fit my Nitto's..not to mention one was slit open and the other side the bracket thats bolted to the body to hold the quad was broke....and i was going to just flip them but after coming across those problums i just trashed them...and i havnt seen anywhere, where you can get factory style quads..there usually the KYB type and i didnt think it would work to flip them?

 

[skip nay]

I feel the best sollution to get rid of wheel hop is to
replace the rear shocks, The stock shocks are weak IMO.

I agree but you will like something that is adjustable so you can soften them up.

 

[90bronconate]

deffinitely get the adj uppers so you can set your pinion angle. there's an article on hardcore50 that explains why pinion angle is important, i just can't seem to find it.

 

[DemonGT]

but i would have no idea where to set them at